- Ready to spray base coat. Base coat must be shaken before spraying. 

- Clear coat with premeasured activator. Activator is added to the can with clear coat before spraying. After activation, clear coat must be used within 3 hours. 

- See listing's pictures for technical data. 

1. Always test spray base coat before application. Metallic and pearl colors are sensitive to spaying pressure and coat thickness. Start test spaying with light coats, add more heavier coats for best match. Heavier coats will make the color darker (see listing's pictures). If color does not match, contact us via Ebay messaging system. 

2. Primer, Base Coat and Clear Coat flow will change depending on the temperature. Lower temperatures will reduce drying speed, which may cause "runs". Before applying to the vehicle, test spray using spraying card (included in every order) to determine drying speed. 

If spraying new unprimed plastic, the surface must be lightly sanded with 600 sandpaper or automotive Scotch-Brite pad, cleaned with Wax & Grease remover or alcohol and sprayed with a single coat of adhesion promoter, before applying primer/color/clear coat. 

If spraying primed parts or over existing paint, primer is optional, adhesion promoter is not required. The surfaces will need light sanding and cleaning before spaying color and clear coat. 

For equipment set up recommendations and spraying tips, see listing's pictures.