Match Up 8DSP 8-Ch Amp & 9-Ch DSP + PP-BMW 1.7RAM Plug & Play Upgrade Cable 2019
MATCH UP 8DSP 6x65w+2X160w RMS + 9-Channel 64 Bit DSP
MATCH PP-BMW 1.7RAM Plug & Play Upgrade Cable Harness
MATCH UP 8DSP
The UP 8DSP is the most powerful MATCH DSP amplifier and comprises our new ADEP.3 circuitry.
The powerhouse for simple OEM integrations
The new UP 8DSP is a true all-rounder that not only delivers unbridled power and dynamics for true hi-fi sound, but at the same time comes with all the prerequisites for easy integration into the vehicle.
- Ultra efficient 8-channel amplifier with 1-channel line output and 9-channel DSP
- Perfect for upgrading multi-channel factory sound systems
- Optional cable harnesses for easy integration into existing multi-channel factory sound systems
- Extremely powerful 64 Bit "fixed point" Audio DSP
- ACO - Advanced 32 Bit CoProcessor platform for extended feature set
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- Proprietary TuneEQ function for automated adjustment of the output equalizers
- SFX (DSP Sound Effects) - Augmented Bass Processing, RealCenter & Co.
- Smart 6-channel highlevel input with ADEP.3 circuit
- 1 to 1 Input / Output Routing (IOR) in combination with the optional MEC ANA-LOG IN module - same number of highlevel inputs and amplifier outputs
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- MATCH Extension Card slot (MEC) for system expansions like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Optical input in SPDIF format with sampling rate between 12 and 96 kHz
- Mono RCA output for the connection of an external amplifier e.g. subwoofer amplifier
- SCP (Smart Control Port) for optional accessory like DIRECTOR, CONDUCTOR & Co.
- Auto Remote switch
- Start-Stop capability down to 6 Volts supply voltage
- Compact design with low heat dissipation thanks to extraordinary efficiency
Seamless connectivity
With its six high-level inputs, an optical digital input, the MATCH Extension Card slot and many intelligent technologies, such as the proprietary ADEP.3 circuit, the UP 8DSP is perfectly equipped for seamless adaptation to existing multi-channel sound systems.
Furthermore, with a total of eight amplifier channels as well as the additional line output - in combination with the powerful 9-channel DSP - individual speaker configurations can also be realized.
Two amplifier output channels deliver 160 Watts RMS into 2 Ohms - plenty enough for fuelling even large subwoofers.
Virtual Channel Processing - this is how signal routing works today
The optimal adaptation to existing multi-channel sound systems requires sensible management and configuration of the many DSP channels - so it was no question that the UP 8DSP is also equipped with Audiotec Fischer's innovative virtual channel processing.
Especially when front, rear and center systems are split into multi-way systems, conventional routing concepts quickly reach their limits, both in terms of implementation and usability. The multi-stage "Virtual Channel Processing", in conjunction with the recognized user-friendly DSP PC-Tool software makes it easy to map even highly complex system configurations and to freely assign our proprietary FX sound features. Additionally, thanks to its generous number of channels in combination with the optional MEC ANALOG IN module the UP 8DSP is also a prime example for applications where 1 to 1 routing (IOR) makes sense.
ACO - Advanced 32 Bit CoProcessor Platform
Of course, the UP 8DSP is equipped with our proprietary 32 Bit ACO platform, which doesn't just take over all control tasks ultra-fast, but also handles a bunch of audio functions: fantastic sound effects such as Augmented Bass Processing or Real Center are implemented as well as a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios, which already include a sound setup by default.
Compact dimensions
Despite its wide feature set and beefy output power of 6 x 65 Watts at 4 Ohms plus 2 x 90 / 160 Watts at 4 / 2 Ohms, the UP 8DSP comes - as usual for a MATCH amplifier - in a very compact design, so that it can be installed even in confined spaces without any problems.
DSP PC-Tool 5 feat. TuneEQ - Powerful features for the ultimate sound experience
Of course, the MATCH UP 8DSP can be easily configured via our new, professional and exceptionally intuitive DSP PC-Tool 5. The familiar, numerous setting options leave nothing to be desired and guarantee an extremely precise sound adjustment even for complex system configurations. And thanks to the new, proprietary TuneEQ function for automated frequency response correction, you also save a lot of time when optimizing your sound.
Specification
Part Number: M118000
- Output power RMS / max.
- - @ 4 Ohms Channels A - F: 6 x 65 Watts
- - @ 2 Ohms -
- - @ 1 Ohm -
- - bridged @ 4 Ohms -
- - bridged @ 2 Ohms -
- - Subwoofer output @ 4 Ohms Kanal G - H: 2 x 90 Watts
- - Subwoofer output @ 2 Ohms Kanal G - H: 2 x 160 Watts
- Amplifier technology Class GD
- Inputs 6 x Highlevel speaker input
- 1 x Optical SPDIF (12 - 96 kHz)
- 1 x MEC
- 1 x Remote In
- Input sensitivity 2.8 - 11 Volts
- Input impedance RCA / Cinch -
- Input impedance highlevel 9 - 33 Ohms with ADEP.3
- Outputs 8 x Speaker output
- 1 x RCA / Cinch
- 1 x Remote Out
- Output voltage RCA / Cinch 3 Volts RMS
- Frequency response 10 Hz - 22,000 Hz
- DSP resolution 64 Bit
- DSP power 295 MHz (1.2 billion MAC operations/second)
- Sampling rate 48 kHz
- DSP type Audio signal processor
- Signal converters A/D: BurrBrown
- D/A: BurrBrown
- Signal-to-noise ratio digital input 106 dB (A-weighted)
- Signal-to-noise ratio analog input 104 dB (A-weighted)
- Distortion (THD) < 0.03 %
- Damping factor > 100
- Operating voltage 10.5 - 17 Volts (max. 5 sec. down to 6 Volts)
- Power rating DC 12 V ⎓ 40 A max.
- Idle current 380 mA
- Max. remote output current 500 mA
- Fuse 2 x 25 A LP-Mini-fuse (APS)
- Additional features Class GD technology with dynamically controlled
- power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB, MEC slot, Auto Remote switch, galvanically isolated Line Out
- Dimensions (H x W x D) 46 x 130 x 153 mm /
- 1.81 x 5.12 x 6.02"
What's Included
- MATCH UPGRADE amplifier UP 8DSP
- Connection cable x4
- Control Input-to-SCP adaptor
- Power Input connector
- Mounting plates & material
- USB cable
- Instruction manual
MATCH PP-BMW 1.7RAM
UPGRADE cable harness for the easiest connection of a MATCH UP 8DSP amplifier to a BMW sound system with RAM (Receiver Audio Module) - manufacturing year > mid 2019
MATCH PP-BMW 1.7RAM
The 7-channel UPGRADE wiring harness PP-BMW 1.7RAM enables the simple connection of a MATCH UP 8DSP or UP 7DSP amplifier with MEC ANALOG IN module to selected BMW models from 2019 with a factory RAM Receiver Audio Module.
- UPGRADE cable harness for the easiest connection of a MATCH UP 7DSP amplifier with MEC ANALOG IN module to a BMW sound system with RAM (Receiver Audio Module) - manufacturing year > mid 2019
With integrated ADEP-module (Advanced Diagnostics Error Protecion) to serve the factory speaker-diagnostics of the OEM center channel
Cable length 1.00 meter
Specification
Part Number: M171308
- Cable length
- 1.00 Meter
- Connections
- 1 x 8-pole MOLEX plug for the connection of the MATCH BMW underseat subwoofer & the center speaker
- 1 x 20-pole MOLEX plug for the connection of the System Connector input of the UP 7DSP
- 1 x 4-pole MOLEX plug for the connection of the highlevel inputs E + F of the MEC ANALOG IN
- 1 x 4-pole MOLEX plug for the connection of the ADEP-module of the factory center channel
- 1 x 42-pole BMW RAM system jack
- 1 x 42-pole BMW RAM system plug
What's Included
- 1 x UPGRADE cable harness MATCH PP-BMW 1.7RAM with ADEP-module connected to the factory center channel
Shipping
All orders qualify for Free Shipping in the continental United States. Hawaii, Alaska, Military and US territories may require additional postage depending on the product and location. Please message us if there are questions during the checkout process.
High value orders (above $750) may require signature upon delivery as this protects us both from porch pirates. Please ensure someone will be available to sign for delivery (or pickup from the carrier).
Return and Exchange
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
About Us
We've been doing this car audio thing for over 30 years for one primary reason... Passion. We got bit by the car stereo bug early on and we've loved it ever since. We know we're a bit fanatical, but in the best possible way.Hey, I'm Eric and I'm the main guy behind Edge Custom Audio. What started as a fun hobby back in the 90s soon became a business venture with a focus on gear. While I've enjoyed installing for many years, the satisfaction of the process was often overshadowed by the desire for the next best thing. The common theme with every completed project has been wondering "what if we had used that different amplifier" or "how would it sound with those other speakers". I've learned to embrace being a gearhead and appreciate the opportunity to share that with you.Our team here at Edge Custom Audio is all about quality. Quality products, quality service, and quality processes. We communicate personally because we're all just people after all. We ship in a safe and timely manner because we know you're excited to get your new gear. We stand behind everything we do because, well, it's the right way to operate. In the end, we know you're entrusting us with your hard-earned cash and we don't take that lightly.
