Vapor Canister Compatible with 2004-2005 Buick Rendezvous 2004-2016 Cadillac CTS Escalade SRX Chevy Tahoe GMC Yukon 3.6L 4.8L 5.3L 6.0L 6.2L Replaces9431, 911-149, 12573648


Product Details

  • 【Compatibility】This vapor canister Compatible with 2004-2005 Buick Rendezvous 3.6L,Compatible with 2004-2005 Cadillac CTS SRX Base 3.6L,Compatible with Chevy Tahoe 4.8L 2004-2009,Compatible with 2007-2016 GMC Yukon 6.2L
  • 【MATERIAL】Activated Carbon: Excellent as a filter material for trapping fuel vapors.High-quality plastic: As the shell material，each item has been factory tested and meets or exceeds OEM specifications
  • 【Features】As a critical part of the EVAP system, vapor canister trap and store fuel vapors with strong adsorption activated carbon. Thus it can help reduce the use of fuel and protect the environment
  • 【IMPORTANT NOTICE】Before placing the order, please check your car model in the Fitment Filter System in the top left corner. Compatibility information provided is for reference only. Please make sure to match the exact part numbers between this part and the part that you are replacing

Replace Part Numbers9431 911-149 12573648 4B1200 CP524Fits the Following Vehicles 2004-2005 Buick Rendezvous 3.6L 2004-2009 Chevy Tahoe 4.8L 2004-2005, 2009-2016 Chevy Tahoe 5.3L 2008-2009 Chevy Tahoe 6.2L 2004-2005 Cadillac CTS Base 3.6L 2008-2016 Cadillac Escalade 6.2L 2004-2005 Cadillac Escalade 5.3L 2004-2006 Cadillac Escalade 6.0L 2004-2005 Cadillac SRX Base 3.6L 2004-2009 GMC Yukon 4.8L 2004-2005, 2009-2016 GMC Yukon 5.3L 2004-2006 GMC Yukon 6.0L 2007-2016 GMC Yukon 6.2LEASY INSTALLATION Remove the Old Canister: Find the old canister at your vehicle. Disconnect the 3 tubes of fuel tank, purge valve and vent solenoid. Remove bolts from the Bracket then you can bring down the old canister. Notice: Please don’t forget to take off the old blue gap. Clear Out for Better Use: Blow compressed air through all lines and clear out residue. Replace the New Canister: Take off the bracket from the mounting point. Install the new one to the bracket with bottom accordingly, then stick to the mounting point. Connect the new one with original tubes.