Hobbyist kit for Lapidary Rock/Gemstone Cutting Machine.

I sell a Handmade lapidary saw for hobby use and precision cutting of gemstone or stone for beautiful handmade pieces.

The machine has a 120W 12V 10A (rated 2700rpm) motor with a PWM speed control and ON/OFF switch. The machine's right plane can be set in two different positions: a low and high position (high position to cut long rock slab and low for small, precise cutting). The machine is sent with a 150mm x 0,2mm (6”) precision disc but can mount discs form 100mm to MAX 180mm (4” to 7”), it has gaskets along the edges and also an oil seal on the motor axel, the electronic is inside a compartment separeted from the water basket and a dripping place for your cutted stone, the tank inside is covered with a water proof coating and has a slope with markings for the correct water level for the disc you are using.
The dimensions of the cutting plane are 14.6" x 4.5" (370 x 115mm) for the right plane and 9.8" x 4.5" (250 x 115mm)for the left plane. The total weight of the machine is 3kg (6.6lbs) with the base of 9.4" x 9.8" (239 x 250mm), easy to carry and use in your working sapce.

IMPORTANT:  The machine is not provided with a power supply (you need a standard certified (EU/UL)12V 10A 120W power supply with a jack connector (2,5mm x 5,5mm) usually used for a laptop)

Disclaimer: Handmade product for hobby use only, NOT CE/UL certified for professional use. The purchaser is responsible for proper and safe use. Not suitable for children (18+ only). Use only with protective eyewear and gloves, and follow safety precautions. Do not connect the machine directly to a 230V/120V connection without the right certified power supply. Always disconnect the machine before changing discs, and always make sure to have tightened all the nuts and bolts.