|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spacer Thickness: 1 inch or 25 mm
Vehicle Bolt Pattern: 8x7.09 inch or 8x180 mm
Wheel Bolt Pattern: 8x7.09 inch or 8x180 mm
Thread Size: 14x1.5
Bolt Shack Length: 45 mm
Torqued Down By Hand At: 85-90 FT/LBS
Hub Bore: 124.1 mm
Number of Pieces: 4
For Chevrolet Silverado 2500 2011-2018
For Chevrolet Silverado 2500 HD 2011-2025
For Chevrolet Silverado 3500 HD SRW 2011-2025
For GMC Sierra 2500 HD 2011-2025
For GMC Sierra 3500 HD SRW 2011-2025
Fitment Note:
The spacers will NOT fit DUALLY (Dual Rear Wheel Models)
May Not Fit on Rear Hub - Your factory axle part may be sticking out from the hub bore, the hubcentric spacer with wheel centric lip will not fit if the axle part sticks out exceeded 25mm.
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.
4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.
6. Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.
7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is that it moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are used when the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
- We stand behind every product we sell.
- All of our brand new items come with a 60-Days money-back guarantee.
- We define the item as defective only if it doesn't function as described.
- It is the buyer's responsibility to understand the item description before bidding.
- We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
- We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
- We accept all ebay payment
- Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.
- All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
- We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
- The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
- We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
- International Buyers Please Note:
- a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
- b) Please check with your country's customs office to determine what these additional costs will be prior to bidding
- Serious Buyer Only! Please place bid or "Buy it now" only if you agree the price and terms of the product and no argument after the auction.
- We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any other Intellectual Property Rights, please contact us. We will remove any offending listing immediately while awaiting further discussion.
4Pcs 1" 8x180 Hub Centric Wheel Spacers 124.1 CB For Chevy Silverado 2500 HD
Vehicle Bolt Pattern: 8x7.09 inch or 8x180 mm
Wheel Bolt Pattern: 8x7.09 inch or 8x180 mm
Thread Size: 14x1.5
Torqued Down By Hand At: 85-90 FT/LBS
Number of Pieces: 4
For Chevrolet Silverado 2500 2011-2018
Fitment Note:
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.
4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.
6. Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.
7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is that it moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are used when the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
Copyright of HK-ZHAOYU. All rights reserved. |
