• Class D 5-Channel Amplifier
• RMS Power Rating @14.4V: Channel 1 - 4
• 4 ohms: 75 watts x 4 chan.
• 2 ohms: 100 watts x 4 chan.
• Bridged 4 ohms: 200 watts x 2 chan.
• RMS Power Rating @14.4V: Sub Channel
• 4 ohms: 180 watts x 1 chan.
• 3 ohms: 240 watts x 1 chan.
• 2 ohms: 300 watts x 1 chan.
• RMS Power Rating @12.5V: Channel 1 - 4
• 4 ohms: 60 watts x 4 chan.
• 2 ohms: 90 watts x 4 chan.
• Bridged 4 ohms: 180 watts x 2 chan.
• RMS Power Rating @12.5V: Sub Channel
• 4 ohms: 180 watts x 1 chan.
• 3 ohms: 240 watts x 1 chan.
• 2 ohms: 300 watts x 1 chan.
• NexD High Speed Switching Class D Technology
• LED power (green), over-current (yellow) and protect (red) indicators
• Advanced Rollback Protection
• Differential Balanced Input Section
• Selectable turn-on modes: REM / Offset / Signal
• +12 V Remote Turn-On: Traditional remote lead wire, from headunit
• DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
• Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
• Speaker level inputs via RCA
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Detented, Calibrated Filter Freq. Potentiometer
• Input mode selectable: 2 Ch. / 4 Ch. / 6 Ch.
• State-variable / Sallen-Key Crossover
• Selectable Low-Pass Filter Slope (Sub Ch): 12 dB or 24 dB
• Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave
• Selectable HP filter mode (Ch 1/2): Off / x1 / x10
• Selectable filter mode (Ch 3/4): Off / BP/ HP
• Input sensitivity:
• Low level: 800mV - 8V
• High level: 200mV - 2V
• Frequency Response (Ch 1-4): 12 - 22,000 Hz
• Frequency Response (Sub Ch): 10 - 1,000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: >104 dB
• Damping Factor @4ohms: >150 / 50 Hz
• Fuse Rating: 60A x 1 inline (not supplied)
• 4 gauge power and ground wiring is required for installation