OPERATING SPECIFICATIONS
-
Min. operating temp: 0.6° C / 33° F
-
Max. operating temp: 38° C / 100° F
-
Min. working pressure: 138 kPa / 20 psi
-
Max. working pressure: 827 kPa / 120 psi
-
Flow Rate: 1.9 lpm / 0.5 gpm
-
Service life*: 1.5 lpm / 0.4 gpm
*Water high in particles or other contaminants may reduce service life.
Provides cleaner, fresher water and ice by removing the following impurities:
-
Chlorine
-
Taste
-
Odor
Help keep your food tasting fresh by periodically changing your refrigerator's air filter. It’s best to change your air filter approximately every six months and/or when your CHANGE FILTER light comes on your LED control panel.
The LT120F-WF Refrigerator Air filter is compatible with the following part numbers:
LG: LT120F, ADQ73214404, ADQ73334008
The LT120F-WF is compatible with the following LG refrigerator model numbers:
Pure N Fresh, and many more...
How to change the air filter LT120F-WF
 |  |
Step 1 - Locate your air filterLet’s start by first locating your Fresh Air Filter. You’ll find it centered at the back of your refrigerator just above the top shelf. | Step 2 – Remove your old air filterTwist your air filter cover to the left to detach it from the refrigerator wall. The filter is located on the inside of the filter cover. Remove and discard the old filter. |
 |  |
Step 3 – Install a new air filterPlace a new filter inside of the cover with the side that says 'Front' facing outward. Then place your air filter back in your refrigerator. Twist the filter cover to the right to re-attach it to your refrigerator’s wall. | Step 4 – Reset your air filter sensorAfter changing your air filter, push and hold the Air Filter button for three seconds to reset the filter sensor. Good to Know: It’s important to change your air filter periodically to help eliminate any fridge odor. |