Hooper Gun Works – HGW

Rock Island Armory Full Size 1911 Ultra BULL Slide 45 DPP Optic Cut, RMR Adapter

Part # RIA-1911-SLIDE45-FS-Ultra-DPP_RMR-BULL

1911 slide made by Rock Island Armory / Armscor. Rock Ultra full size 5″ slide for .45 ACP.

Custom cut for using an optic. This process deletes the rear dovetail cut. The slides were then bead blasted and finished black. As such, there are NO logos or writing on the slide.

This unique package allows for direct mount of a Delta Point Pro optic. Using the included adapter plate, you can mount an optic compatible with the Trijicon RMR optic cut.

Slide

  • Full Size / Government
  • .45 ACP
  • Vertical rear serrations
  • Scalloped cut front end
  • **There is NO barrel bushing lug cut. This slide will only work with a bull barrel and reverse plug.**
  • Front Novak Dovetail
  • Rear Delta Point Pro Optic Cut
  • Black Finish

Adapter Plate

  • Installs on Delta Point Pro Optic Cut
  • Uses 2x included custom M4x0.7 screws
  • Install wrench (M2.5) included

Optic Install Screws Included

  • 4x 6-32×7/16x for installing Trijicon optic
  • 4x 6-32×3/8″ for installing Holosun optic
  • Install wrench (5/64) included

Slides must be fit to the frame by a qualified gunsmith. No internal parts are included. No optics are included. Pictured optics are to demonstrate compatibility only.

RIA-1911-SLIDE45-FS-Ultra-DPP_RMR-BULL

Shipping

Shipping time:
We strive to get your order to you as quickly as possible. Orders are shipped depending on when payment clears.

Delivery time:
Ground Advantage (formerly First Class Mail) may take up to 10 days while Priority Mail is generally 2-3 days once the Post Office receives the package. 

California Deliveries:
Due to recent legislation, barrels and products containing barrels may only ship to an FFL (dealer, manufacturer, or importer type). See SB-704, AB-1263 & California Penal Code 33700.

Service / Tips

Please contact us if you need to return a part. We are unable to accept returns on used, fitted, or altered parts. Returns must be in new, unused condition and in their original packaging.

We recommend that any installation or alteration of parts be done by a qualified gunsmith for the safest and most accurate results. Any mention of "drop-in" is terminology from the manufacturer. Any replacement of any firearm part may require fitting even if the manufacturer states it is a "drop-in" part.