Replacement Front Left Disc Brake Caliper for 1995-2004 Toyota Tacoma (3.4L V6) (RWD)

Product Description

Brake Caliper

Features and Benefits: Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance., Pistons are durable, resistant to cracking or pitting and handle great loads., Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%., Mounting bracket is included where applicable for a hassle-free installation., New banjo bolts are included where applicable to ensure a perfect fit and quick installation., New bleeder screws provide trouble-free bleeding and a positive seal., New stainless steel hardware clips and new mounting pins are included where applicable., New washers are included where applicable for a proper seal., Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish., As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit., A plastic cap plug protects every brake port thread to ensure trouble-free installation.

Caliper Color: Gray

FAQs: What type of grease is used on floating caliper mounting pins?, What type of fluid should I use: DOT 3, DOT 4, or DOT 5?, Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations., Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation., New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications., Brakes squeal all of the time. What's causing the squeal?, Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?, Car pulls to one side during braking. Why?, Could calipers be the cause of a low brake pedal?, Do all of your Calipers come with the new hardware and a mounting bracket for installation?, Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish., A silicone grease is used on floating caliper mounting pins., A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder., As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.

E-Waste: No

Piston Size (OD) (mm): 60.53

Piston Size (OD) (in): 2.383

Installation Hardware Included: Yes

Pads Included: No

Mounting Bolts Included: No

Product Condition: Remanufactured

Brake Caliper Finish: Oil Emulsion

Bleeder Port Size: M7x1.0

Piston Quantity: 1

Piston Material: Steel

Package Contents: Caliper; Instruction Sheet; Hardware Kit

Inlet Port Size: 0.39

Compatible with the following vehicles