Neatcut is a neat cutting oil formulated with sylphurised ester additives using solvent refined base oil. Used in general machining operations on low and medium tensile steels. Especially recommended for single and multi spindle automatics and thread rolling operations. You can use it for automatic operations on most non-ferrous metals. Neatcut FE22 will not stain yellow metals, contains anti mist additives and will extend tool life and working components.

As neat cutting oils are not mixed with water, they provide better tool life and surface finishes for difficult operations at low speeds than water soluble cutting oils.  The maintenance of neat cutting fluids is also easier, providing a longer coolant life.

The main disadvantage of neat cutting oils, is the poorer cooling capability compared to water soluble cutting fluids. This is  particularly relevant with high speed machining.  Therefore, neat cutting oils are mainly used for honing, deep hole drilling, grinding and broaching oils.

Neatcut Spec:

Specific Gravity @ 15dc : 0.870

Kinematic Viscosity : 40dc : 22.0

Copper Corrosion Test: 1b.

Colour: Tan

*****IMPORTANT INFORMATION*****

*******YOUR PACKAGE WILL HAVE A 'LEAVE SAFE' SET AS DEFAULT FOR DELIVERY. IF YOU WANT THE COURIER TO LEAVE IT IN A SPECIFIC PLACE, PLEASE ADD A NOTE TO YOUR ORDER**********


ADDITIONAL SHIPPING CHARGES:

£10 SURCHARGENO DELIVERY :
AB35 - AB38HS1 - HS9
AB54 - AB56KA27 - KA28
FK18 - FK21KW15 - KW17
IV1 - IV63PA20
IV99PA41 - PA49
KW1 - KW14PA60 - PA78
PA21 - PA38PH42 - PH44
PA80ZE
PH17 - PH26 
PH30 - PH41NO OTHER ISLANDS
PH49 - PH50 
  
ISLE OF WIGHT
£10.00
 
NORTHERN ISLAND
£10.00