1960s Cal.89 Hand-wound

This is a 1960s SS model. The dial is a glossy black dial. A combination of 3.6.9.12 indexes and dolphin hands. A classical design with metal-embedded dot minute memory. The SS case has a graceful round shape with twisted lugs. The back cover is a snapback. The band is fitted with a non-OEM leather strap. This is a masterpiece that allows you to enjoy the timeless and sturdy temperament unique to IWC.

[Dial] Probably a redone. Spots can be seen. There is no fading of the letters. The hands and indexes are deteriorated.

[Case/back cover] Threads and minor scratches can be seen. The back cover has scratches from opening, corrosion, and dents.

[Crystal] Rubbings and minor scratches can be seen. Visibility is adequate when worn.

[Belt] Non-OEM. Can be worn immediately.

[How to use] The knob on the right side of the case is the crown. You can wind it by hand in the same position.

Since it is a hand-wound watch, please wind the mainspring with the crown every day. If you wind it too hard, the mainspring may break, so please wind it as slowly and gently as possible. Wind the crown by pushing it forward with the pad of your finger in a clockwise direction.

Pull the crown and turn it to move the hands and adjust the time. There is no hack (second hand stop) function.

[Accessories] Only the main unit.

The daily difference is within 30 seconds in actual measurements over 24 hours. (There may be some posture differences when implemented). The lug width is 17 mm. The case diameter is approximately 32 mm (excluding the crown), the length (from lug to lug) is approximately 40 mm, and the thickness is approximately 9 mm (including the crystal).