REPLACEMENT/REPAIR ON OFF FLOW CONTROL HANDLE FOR MANY MAKES OF THERMOSTATIC BATH SHOWER MIXERS & VARIOUS SHOWER VALVES:

• Principally made from ABS plastic this Control Handle is suitable for many manufacturers where the Ceramic Disc has a spindle with a 7.5mm diameter and using 20 Teeth. Not all suppliers/manufactures use this size, however this is the only size I stock, so please check carefully before ordering.
• The spline socket is made from Brass so shouldn't wear out like the plastic ones do! 
• The depth of the spline socket is some 19mm from the rim of the handle.
• The Handle is finished in 'mirror' chrome. 
• The temperature markings are in increasing sized symbols.
• It comes with a new grub screw and end cap.
• To install it with a Bath Mixer Tap or Torpedo style Bar Shower valves, all you have to do is prise off the end cap, undo the grub screw inside the handle and push it onto the splines, then re-secure with the grub screw.

The Dimensions are:   

• Total Length of Handle is some 42.5mm. This includes both the chrome and black sections.
• The widest section is some 40mm diameter.
• The diameter of the spline the handle fits onto is 7.5mm - see pictures, and there are 20 teeth. The teeth are approx. 6mm long. 
• Please note that these do NOT fit all mixers so it is worth checking before ordering please!