2x E-Tech Professional Car Brake Caliper for Red Aerosol Spray-On Paint Can 400mL

E-Tech Spray On Caliper Paint is a high quality, long lasting, enamel coating specially formulated with a ceramic resin to cope with temperatures of up to 250°C, and is suitable for use on most brake calipers & drums.

The spray-on application is simple to apply and provides a hard, chip resistant, long lasting finish which will retain its colour due to the high pigment content.

Features
IMPORTANT - READ ALL INFORMATION BEFORE USING THIS PRODUCT

SURFACE PREPERATION
  • For best results ensure the brake caliper/drum and the paint are at room temperature before use (approx 17°C to 21)
  • For best results apply in a warm, dry and dust free area (garage, workshop/outbuilding etc)
  • Use a steel brush or wire wool to remove loose dirt and rust deposits from the surface of the brake caliper.
  • Then clean the area to be painted thoroughly with brake cleaner or a degreaser or steam cleaner, removing all traces of brake dust, oil, dirt, grease etc.
  • Mask off any area that you do not want to be painted, or may be affected by any overspray.CAUTION - Be careful not to get any paint on brake discs or brake pads.
  • The srea to be painted myst be completely dry and thoroughly clean before you strat to paint.
APPLICATION
Always check your temperature ratings before applying
  • Shake can vigorously for a mminimum of 2 minutes before use.
  • Hold can 20-30cm (8-12 ") from surface and spray using a side to side motion.
  • Build up layers with several thin coats allowing approximately 30 minutes between coats for the paint to dry to a tacky film (do not apply heavy coats).
  • Shake can between coats.
  • After applying the final coat allow 6-8 hours for the enamel to dry.
Please note: 
Drying/curing times are dependant on the number and thickness of coats applied, and the ambient temperature at the time of applciation.

After use turn can upside down, spray until nozzle is clear.

Also includes 4TRESS non-slip multi-purpose rubber mat 

A non-slip multi-purpose car dashboard rubber mat is a mat designed to be placed on a car dashboard to prevent items from slipping or sliding around while driving.
Made from durable rubber materials, these mats are designed to grip and hold items in place, reducing the risk of damage or distraction while driving.
They are typically lightweight and easy to install, and can be customized to fit a wide range of dashboard shapes and sizes.
In addition to their primary use on car dashboards, these mats can also be used in other areas of the car, such as the center console, to provide additional grip and prevent items from shifting during travel. Overall, a non-slip multi-purpose car dashboard rubber mat is an essential accessory for any driver looking to enhance the safety and organization of their vehicle.
In addition to their use in cars, non-slip multi-purpose rubber mats can also be used in homes or offices to prevent items from slipping or sliding on tables, desks, or other surfaces.
They are easy to clean and can be reused multiple times, making them a practical and cost-effective solution for improving safety and organization in a variety of settings.

All images are for illustrative purposes only. Product Design and packaging are subject to manufacturers' changes without prior notice.