eBay

Multi Point Parallel Splitter Cable for Philips Hue Gradient LightStrip

Compatibility

There are many versions of Philips Hue LightStrip now available, and lots have differing connectors. Most versions have 2 different sized connectors, the Control Box socket and the LightStrip Extension connector, making 3 different point to point cable combinations for each of the many versions. That's dozens of different cable combinations, plus splitters, all for different purposes.

Since all of our cables are made to order, please double-check the diagrams and description to be sure that this cable is compatible with your specific lightstrip, setup and needs before purchasing.

Essential

Control Box

Starter LightStrip
Extension LightStrips

Other Cables

PLEASE READ FULL DESCRIPTION. There are many versions of Philips Hue LightStrip now available, and lots have differing connectors. Most versions have 2 different sized connectors, the Control Box socket and the LightStrip Extension connector, making 3 different point to point cable combinations for each of the many versions. That's dozens of different cable combinations, plus splitters, all for different purposes.

Since all of our cables are made to order, please double-check the diagrams and description to be sure that this cable is compatible with your specific lightstrip, setup and needs before purchasing.

This is a custom, made to order Gradient Parallel Cable Kit for Philips Hue Gradient LightStrip that will allow to to run multiple Philips Hue Gradient LightStrip Extension LightStrip's in parallel from the same control box. You can choose how many Extension LightStrips you want to connect. The length to the first LightStrip. And finally the length between each LightStrip after that. The kit allows you to connect a 2m Starter LightStrip, and multiple 1m LightStrip Extensions.

There are multiple scenarios for which these can be used. For example, you may want to light several shelves with the cable all on one side. Or underneath steps on a staircase.

The gradient will be set by the longest leg of lightstrip. The gradient will be mirrored on each leg of lightStrip. Each Lightstrip will start at the same colour and run in parallel with one another. If a Lightstrip is shorter, it will only show the equivalent portion of the gradient. The diagram demonstrates how the Gradients will be displayed.

This will not connect to any cut edges of LightStrip.

All of our Philips Hue Gradient LightStrip Cables, Leads and Extensions are made with the proper connectors for the Philips Hue Gradient LightStrip system.

Dimensions

< Choose the Length >

All of these cables are made to order, to the exact length you need. If the size you need is not in the options, just purchase a length that will accommodate the length you would like, then drop us a note with your exact specification. Length is from plug tip to socket tip, excluding any external pins.

Whilst other Philips LightStrips are controlled by power for each colour, Gradient LightStrips are controlled by data. Data doesn't travel as far as power, so cable lengths for Gradient LightStrips are much more limited. Cables should not be combined for this reason.

These cables will work fine for most setups, but for some longer length lightstrips there the may be difficulty. There isn't a 100% formula as to what will and work work for each setup, this is one of the reasons you can return these free of charge if they don't work for your particular Setup.

Fitting Instructions

Please turn off the lightstrip at the wall before plugging these cables in. This is because the Control Box calibrates to new cables and Extension LightStrips when powered on so it knows how far to spread the gradient.

Although the cable will plug into some connectors either way up, they will only work one way. If it doesn't work, turn it off at the wall and plug it in the other way up. It shouldn't damage the lightstrip if you plug it the wrong way up, as long as its not powered on for hours.

As Phillips didn't design these lightstrips with cables in mind, there is nothing for cables or lightstrips to clip and lock onto. LightStrips only don't come loose because they are stuck in place. In some situations you may need to secure the connections in place with insulation tape or heatshrink.

Philips Hue LightStrip Cables and Solutions

These are for use with Philips Hue LightStrip products only. Whilst our cables and adapters are being used by ourselves without any problems, you use them at your own risk. It is recommended that you connect no more than 10 meters of actual LightStrip to one Control Box. LightStrips and Control Box are not included.

Some images may not show you the exact cable you will receive, they are there as a helpful guide that shows you how and where it is meant to be used.

Everyone gets things wrong from time to time, so we do accept returns for those times, however, as most of our products are made to order, we kindly ask you to make sure the product you order is the one you need. If you’re not sure, please feel free to ask, I’m sure we can figure it out.

Hue LightStrip Cables, Hue LightStrip Leads, Hue LightStrip Extensions, Hue LightStrip Adapters, Hue LightStrip Pins, Hue LightStrip Sockets, Hue LightStrip Plugs. Philips Hue LightStrip gradient Cables, Philips Hue LightStrip gradient Leads, Philips Hue LightStrip gradient Extensions, Philips Hue LightStrip gradient adapters, Philips Hue LightStrip gradient Pins, Philips Hue LightStrip gradient Sockets, Philips Hue LightStrip gradient Plugs. Philips Hue LightStrip Cables, Philips Hue LightStrip Leads, Philips Hue LightStrip Extensions, Philips Hue LightStrip Adapters, Philips Hue LightStrip Pins, Philips Hue LightStrip Sockets, Philips Hue LightStrip Plugs. LightStrip Cables, LightStrip Leads, LightStrip Extensions, LightStrip Adapters, LightStrip Pins, LightStrip Sockets, LightStrip Plugs.