|
|
|
|
|
|
|
|
|
|
|
|
|
|

What is a Hydraulic Lifter
A hydraulic lifter, also known as a hydraulic valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine. The hydraulic lifteris a hollow steel cylinder encasing an internal piston,situated between the camshaft and each engine's valve.This piston is held at the outer limit of its travel with a strong spring. The lobed camshaft rhythmically presses against the lifter, which transmits the motion to the engine valve in one of two ways:through a pushrod which actuates the valve via a rocker mechanism; or in the case of overhead camshafts, via direct contact with the valve stem or rocker arm.
Parts Fit:
2002–2012 For Dodge Ram 1500 3.7 V6
2004–2011 For Dodge Dakota 3.7 V6
2004–2009 For Dodge Durango 3.7 V6
2007–2011 For Dodge Nitro 3.7 V6
2002–2013 For Jeep Liberty 3.7 V6
2002–2013 For Jeep Cherokee 3.7 V6
2005–2010 For Jeep Grand Cherokee 3.7 V6
2006–2010 For Jeep Commander 3.7 V6
2006–2010 For Mitsubishi Raider 3.7 V6
Part Number: JB-2271(12)
Package Includes:
12 Lifters / Lash Adjusters
How to Replace the Hydraulic Lifters:
Step 1. Prepare
Remove the things on the top of valve covers like air ducts, electrical wires, and other parts
Step 2. Remove Valve Covers
Remove the bolts and then pry the cover off of the block
Step 3. Move Cylinder to Top Center
Move the cylinder and make sure the valves are closed. Next remove the intake manifold bolts and remember their exact placement to make reassembly easier. Pry the intake and loosen up the manifold.
Step 4. Clean Off Manifold Gaskets
Step 5. Remove Hydraulic Lifters
Step 6. Replace Hydraulic Lifters
Step 7. Apply New Gaskets
Step 8. Tighten Bolts
(Professional installation is highly recommended)
Possible Causes of Malfunction:

Picture Shop Category |
Hydraulic Lifters Fits Jeep Cherokee Liberty Dodge Durango Dakota 3.7L 02-10
What is a Hydraulic Lifter A hydraulic lifter, also known as a hydraulic valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine. The hydraulic lifteris a hollow steel cylinder encasing an internal piston,situated between the camshaft and each engine's valve.This piston is held at the outer limit of its travel with a strong spring. The lobed camshaft rhythmically presses against the lifter, which transmits the motion to the engine valve in one of two ways:through a pushrod which actuates the valve via a rocker mechanism; or in the case of overhead camshafts, via direct contact with the valve stem or rocker arm.
Parts Fit: 2002–2012 For Dodge Ram 1500 3.7 V6 2004–2011 For Dodge Dakota 3.7 V6 2004–2009 For Dodge Durango 3.7 V6 2007–2011 For Dodge Nitro 3.7 V6 2002–2013 For Jeep Liberty 3.7 V6 2002–2013 For Jeep Cherokee 3.7 V6 2005–2010 For Jeep Grand Cherokee 3.7 V6 2006–2010 For Jeep Commander 3.7 V6 2006–2010 For Mitsubishi Raider 3.7 V6
Part Number: JB-2271(12)
Package Includes:
12 Lifters / Lash Adjusters
How to Replace the Hydraulic Lifters: Step 1. Prepare Remove the things on the top of valve covers like air ducts, electrical wires, and other parts Step 2. Remove Valve Covers Remove the bolts and then pry the cover off of the block Step 3. Move Cylinder to Top Center Move the cylinder and make sure the valves are closed. Next remove the intake manifold bolts and remember their exact placement to make reassembly easier. Pry the intake and loosen up the manifold. Step 4. Clean Off Manifold Gaskets Step 5. Remove Hydraulic Lifters Step 6. Replace Hydraulic Lifters (Professional installation is highly recommended)
Possible Causes of Malfunction:
Copyright of eccppautoparts. All rights reserved. |