|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description:
A jack plate will compensate for a long shaft engine!
How can you tell if your boat would benefit from a jack plate?
Poor Holeshot
Your outboard's not perpendicular (straight up & down) in relation to the water at top speed.
If you can trim the engine all the way up without the prop letting go or with no appreciable loss of water pressure at full throttle.
The hull doesn't seem to “lift” like it should.
Boats rigged with jack plates, but otherwise identical to yours, turn higher-pitch props and perform better
These characteristics can also be indications of other, more serious problems, but if you’re experiencing any or all of the above, your boat could be a good candidate for a jack plate implant.
Feature:
100% Brand New
Color: Sliver
Material: high strength polished Aircraft Quality Aluminum
Single Adjusting Jack Plate
Bronze and Brass hardware eliminate binding
Adjusts easily by turning one steel bolt
Offers 4 inches of adjustable Vertical movement
4 inches of setback
Weighs 24 lbs
225 Maximum Horsepower
OE FACTORY STYLE & QUALITY, BUT COST-EFFECTIVE
Specification:
Here are the pre-drilled hole dimensions listed below in inches: Pre-drilled holes for 1/2'' stainless hardware; 12 7/8'' across the top two holes from center to center; 9 7/8'' across the bottom two holes from center to center; 8'' of vertical distance between the top holes and bottom mounting holes.
Feature: Offers 4 inches of adjustable Vertical movement; 4 inches of setback; Weighs 24 lbs; 225 Maximum Horsepower. Bronze and Brass hardware eliminate binding. Adjusts easily by turning one bolt.
Function: The jack plate allows you to raise the engine and adjust the boat's trim. This adjustment makes the boat shape flatter, improves control and lets you increase idle speed.
Advantages: Properly adjusting the engine height can reduce drag, improve fuel efficiency, minimize ship impact and vibration, and provide a smoother and more comfortable riding experience.
Material: Made of aluminum, sturdy structure, impact resistant, not easily deformed, not easy to rust, and can be used in outdoor environments such as the ocean for a long time.
Material & Color:
Material: Made of High Quality Aluminium.
Color: Silver.
Application:
This Jack Plate is rated for smaller motors up to 150 hp.
Fits all V-4 and V-6 standard bolt pattern engines.
Package Included:
1x Adjustable 4'' Outboard Boat Aluminum Jack Plate Tool. (100% Brand New Never Used Or Installed)
| Item Specifics | |
|---|---|
| Brand | CarBole |
| Manufacturer Part Number | DAC734 |
| Custom Bundle | No |
| Modified Item | No |
| Non-Domestic Product | No |
| Size | 4 Inches |
| Color | Sliver |
| Type | Jack Plate |
| Interchange Part Number | For JPL4400 Boat |
| Featured Refinements | Outboard Jack Plate |
| Item Condition | New |
| Weighs | 24 lbs |
| Maximum Horsepower | 225 |
| Component Type | Outboard Motor Jack Plate |
| Warranty | Lifetime |
| Minimum Height | Installation Instruction Included Yes Minimum Height |

Ebay Power Seller Excellent Delivery Payment Method Shop Category Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Boat Adjustable 4'' Outboard Boat Aluminum Motor Jack Plate Tool Silver Set of 1
Description: A jack plate will compensate for a long shaft engine!
How can you tell if your boat would benefit from a jack plate? Poor Holeshot Your outboard's not perpendicular (straight up & down) in relation to the water at top speed. If you can trim the engine all the way up without the prop letting go or with no appreciable loss of water pressure at full throttle. The hull doesn't seem to “lift” like it should. Boats rigged with jack plates, but otherwise identical to yours, turn higher-pitch props and perform better These characteristics can also be indications of other, more serious problems, but if you’re experiencing any or all of the above, your boat could be a good candidate for a jack plate implant.
Feature: 100% Brand New Color: Sliver Material: high strength polished Aircraft Quality Aluminum Single Adjusting Jack Plate Bronze and Brass hardware eliminate binding Adjusts easily by turning one steel bolt Offers 4 inches of adjustable Vertical movement 4 inches of setback Weighs 24 lbs 225 Maximum Horsepower OE FACTORY STYLE & QUALITY, BUT COST-EFFECTIVE
Specification: Here are the pre-drilled hole dimensions listed below in inches: Pre-drilled holes for 1/2'' stainless hardware; 12 7/8'' across the top two holes from center to center; 9 7/8'' across the bottom two holes from center to center; 8'' of vertical distance between the top holes and bottom mounting holes. Feature: Offers 4 inches of adjustable Vertical movement; 4 inches of setback; Weighs 24 lbs; 225 Maximum Horsepower. Bronze and Brass hardware eliminate binding. Adjusts easily by turning one bolt. Function: The jack plate allows you to raise the engine and adjust the boat's trim. This adjustment makes the boat shape flatter, improves control and lets you increase idle speed. Advantages: Properly adjusting the engine height can reduce drag, improve fuel efficiency, minimize ship impact and vibration, and provide a smoother and more comfortable riding experience. Material: Made of aluminum, sturdy structure, impact resistant, not easily deformed, not easy to rust, and can be used in outdoor environments such as the ocean for a long time.
Material & Color: Material: Made of High Quality Aluminium. Color: Silver.
Application: This Jack Plate is rated for smaller motors up to 150 hp. Fits all V-4 and V-6 standard bolt pattern engines.
Package Included: 1x Adjustable 4'' Outboard Boat Aluminum Jack Plate Tool. (100% Brand New Never Used Or Installed)
Payment
Shipping
— The item will ship from KY, CA warehouse according to your addess,about 3-8 working days you can get your order.
—We only accept payment from, and ship to, Confirmed PayPal addresses.
—We ship 99.9% of packages the same day if ordered before 5PM EST.
Returns
—Our 30-days Satisfaction Guarantee assures our customers that you will receive all orders promptly and exactly as described,it allows customers to return new and unused products in their originial condition for any reason within 14 days from the date of purchase.
—Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.
—Buyer are responsible for appropriate packing,returning shipping cost,insurance and returning the item in new condition.
—We will replace the returning item with an identical item,or a full refund.
Contact Us
—We leave positive feedback immediately after payment is received
—We really appreicated a postive feedback as much as you do,if you have any issue with the purchase,please contact us prior to leaving any neturel or nagative feedback,YOUR SATISFACTION IS OUR FIRST
Wrking Time
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||