Fast & Free Shipping
Fair Price
Best Offer Guaranteed
High Performance
Hassle Free Returns
Personalized Customer Service
Go Fast Bits
Go Fast Bits DV+ Performance Diverter Valve Black For Mini, Citroën And Peugeot
#T9352
Item Description

BRAND NEW IN BOX

Uses factory solenoid coil for seamless integration
Replaces plastic valve parts with metal for reliability and strength on chipped engines
Direct-fit replacement with GFB’s TMS benefits
Exclusive ?pilot-actuated? valve mechanism for rapid response at high boost
GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.

The solenoid coil itself from the factory-fitted valve is great- the ECU opens it faster than any pneumatic valve so why replace it? The weak point however, is the valve mechanism itself. GFB?s DV+ solves this problem by replacing the valve parts with an anodised billet aluminium housing, fitted with a brass piston machined to exacting tolerances.

GFB Part Number T9352 image taken from flyer
The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story below. Other manufacturers? products involve replacing the entire system with a traditional pneumatic valve. This approach requires long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.

GFB?s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn?t cause compressor surge/ turbo flutter. Oh, and it doesn?t require different springs or frequent re-builds either.

Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to.

However, there are some problems with these valves;

The diaphragms are weak and known to rupture, especially if boost has been increased. Once this happens, the valve will no longer hold boost pressure.
The plastic lip that surrounds the diaphragm is very thin and pieces can break off, potentially ending up going through the turbo.
Additionally, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.

With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely, or change it to a purely pneumatic system. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity – more of a compromise than a solution.

GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.

The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid, the DV+ retains all the benefits of the stock system. Also replacing the valve parts with indestructable metal components ensures strength and reliability, no matter how much boost you run.

That?s not all; rather than using the solenoid to directly actuate the valve, we?ve introduced a unique ?pilot-actuation? system. This means the solenoid only has to control airflow through a small passage that is then used to open and close the piston (rather than opening and closing the piston directly), so it doesn?t matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid?s capability.

This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response.
Vehicle Fitments

CITROËN C4 1.6 THP 155 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
CITROËN DS3 1.6 THP 155/200 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
CITROËN DS4 1.6 THP 155/200 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
CITROËN DS4 1.6 THP 155/200 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
CITROËN DS4 1.6 THP 155/200 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
CITROËN DS5 1.6 THP 155/200 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
MINI Cooper S R56 N14 Engine only (2006 - 2011) DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
MINI John Cooper Works R56 N14 Engine only (2009 - 2011) DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
MINI Cooper S R57 N14 Engine only (2009 - 2011) DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
MINI John Cooper Works R57 N14 Engine only (2009 - 2011) DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
MINI Mini Clubman Cooper S R55 N14 Engine only DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
MINI Mini Clubman John Cooper Works R55 N14 Engine only DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 207 1.6 16V RC DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 207 1.6 16V RC DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 207 CC 1.6 16V DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 3008 1.6 THP DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 508 1.6 THP DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 208 GTI DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 208 GTI DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 1.6T (THP150-175) 2008-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT RCZ THP156 2010-on DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 GTi (THP250-270) 2014-on DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 GTi (THP250-270) 2014-on DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending
PEUGEOT 308 GTi (THP200) 2010-14 DV+ Direct fit replacement with TMS advantage diverter valve (Mini/Citroen/Peugeot Applications). Patent pending

Product Features
  • Sharper throttle response
  • Faster boost recovery on gearshift
  • Solves boost leaking issues
  • Built to last



We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently

We also offer expedited shipping at an extra cost.

International shipping rate applies to addresses in all other locations Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.

Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated.

Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.

There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.

We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.

Ebay Promotional Shipping is only good for shipments going to 48 lower states only.

We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.

Shipping charges are non-refundable.

We require that all payments be paid through PayPal.

Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.

International Buyers, please contact us before bidding to discuss the shipping cost.

We always look to satisfy our customers in whatever needs they may have.



Per our return policy this item can be returned in 60 days, buyer is responsible for the return shipping.

Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

International Buyers, please contact us before bidding to discuss the shipping cost.



Performance your
car
deserves.