Note: photo of multiple color options is of a different product until we can take a similar photo for this item.

This is an extension/enclosure/box/mount for the Ubiquiti Unifi G5 Turret Ultra and G6 Turret camera.  The AI Turret camera will also work, but we have a larger diameter round box for that camera (https://www.ebay.com/itm/276866890925).

The plastic enclosure attaches directly to the Turret base plate using small screws (included with each enclosure).  This is a great way to extend the camera from your mounting surface in special cases.  A classic example is mounting the camera under your soffit and a trim board or gutter is in the way.

The other advantage to this enclosure is that it can completely contain the ethernet cable from the camera as well as the weather-sealed ethernet connector.  In many applications, it is not possible or desirable to drill a large hole to pass this connector through, so this enclosure lets you contain everything right behind the camera, and it is sleeker than a large junction box.  Especially if you are replacing an older Bullet camera with a Turret where you already have an existing cable protruding from the wall or ceiling, you won't want to have to try drilling out a bigger hole for the new connector.

The outer diameter of this enclosure is 87mm (about 3.4 inches) and we make them in various heights and colors.

Stainless steel screws are included with each camera mount/enclosure to attach the camera to the enclosure and attach the enclosure to your surface.  If you are attaching to drywall or masonry then you will need to supply plastic wall anchors.

These are 3D printed ASA parts which we make in-house (so you can expect some small aesthetic imperfections).  ASA is an outdoor plastic with excellent weather and UV resistance (unlike many other plastics being used for 3D printing).  ASA also accepts paint nicely (use a spray paint primer first).