HKS OIL FILTER TYPE 1
Composition
HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filteration performance requirement of most engines.
Filter Life
It is recommended to replace a filter every 10,000 km or 6 months under the normal driving environment.
For sports and/or race use, it is recommend to replace a filter every 3,000 km - 5,000km since the engine RPM is increased to several times of that of a normal driving.
■Compatibility Condition
Please confirm that the filter unit size of φ68×H65 / φ74-H85 / φ65-H50 and screw size.
Diameter of Oil Filter Screw
| Pitch (mm) | External diameter (mm) | Root dia. (mm) | Effective dia. (mm) | Crest angle | Using Maker | |
| UNF3/4-16 | 1.5875 | 19.011 | 17.063 | 18.019 | 60° | Toyota, NIssan, Suzuki, Daihatsu |
| M20 P=1.5 | 1.500 | 20.000 | 18.376 | 19.026 | 60° | Nissan, Honda, Mitsubishi, Mazda |
- Make sure to select a proper oil filter screw size. Since both screw sizes are very close, M20 filter fits on UNF center bolt. If improper screw size is selected, it may cause the leakage of oil.
- What is UNF screw?
It is a triangular thread form by inch in the ISO standard. The thread angle is 60 degrees. It is classified by the suffix "UN".
The type of screw is described by a pitch as "Coarse" (UNC), "Fine" (UNF), "Extra fine" (UNEF). There is also one for aerospace equipment (UNJ). In Japan, use of this screw type is limited only for aircraft and automobiles, but it is widely used in the United States.
JIS employs only coarse (UNC) and fine(UNF) pitches. - IMPORTANT PLEASE READ!
We will endeavour to post any sale items on a next day basis wherever possible, however if we have a particularly heavy workload or an item is nil stock due to high offline sales this may affect quoted e bay stock & delivery time will be extended. Any time scale quoted is upon receiving cleared payment, to help us, could you please include the item number and your ebay user name in any correspondence. Number of items shown as available is a guide only again due to shifting stock on a daily basis and as all items are available through our showroom or mail order dept. Should this occur and we cannot supply in or around the timescales quoted above we will advise the buyer immediately of anticipated delivery time or refund their payment whichever is preferred. If you require your parts quickly then please check stock before ordering to avoid any unexpected lead time. We have no desire to receive or place any negative feedback in any circumstance and hope you understand.
