1950s Ref.2846-4SC Cal.501 Automatic winding

This item is a model made in the 1950s. Equipped with red gold plated, swan neck specification initial full rotation movement Cal.501.

The dial is a faded silver two-tone. Combination of upright 3.6.9.12 index and dolphin hand. Ω emblem at 12 o'clock position. It has a good appearance design with just the right amount of aging and a deep atmosphere. The SS case has a round form with an Ω polygonal crown. The back cover is a snapback. The band is made of externally made black leather. This is a timepiece with a high level of perfection that will attract watch fans who exude a mature atmosphere that is not overly decorated.

[OMEGA] "OMEGA" was founded in 1848 by Louis Blanc in La Chaux-de-Fonds, Switzerland. Taking pride in being the ultimate watch, the brand name comes from the last letter of the Greek word ``Ω=Omega,'' and it is a prestigious company that has achieved many outstanding achievements in its long history spanning more than 170 years since its founding.

[Dial (dial)]

There are signs of aging such as burns, stains, and dirt. There is no fading of characters or memory. The hands and indexes are deteriorated.

[Case/back cover]

Scratches, scratches, and corrosion are observed. The engraving on the back cover is legible. There are no large dents.

[Crystal] There are scratches and scratches. Daily visibility when worn is sufficiently ensured.

[Belt] Made outside the company. There is a feeling of use, but it can be installed immediately.

[How to operate] The knob on the right side of the case is the crown. You can manually wind it in the same position.

Although this is an automatic watch, if the hands have stopped moving, shake the watch body lightly in your palm, wind the crown manually, and check that the hands are moving before use. Wind the crown by turning it to the right (clockwise) and pushing it forward with the pads of your fingertips. Roll up as slowly and gently as possible.

Pull the crown and turn it to move the hands and adjust the time. There is no hack (second hand stop) function.

[Accessories] Main unit only.

The daily difference is within 30 seconds when measured over a 24-hour period. (I think there will be some differences in posture during implementation). Lug width is 18mm. The case diameter is approximately 34mm (excluding the crown), the length (lug to lug) is approximately 40mm, and the thickness is approximately 11mm (including the crystal).

​