|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 Ignition Coil Pack For Ford F150 Expedition 2000 2001 2002 2003 2004 4.6L 5.4
Notes:
Please check the vehicles above for your exact vehicle year, model and engine type before ordering.
Direct plug-in replacement coil, Features top grade silicone magnetic steel , and German copper wire and high temperature epoxy. The internal winding design is optimized for higher energy racing application. It deliver 15% more energy than other coils, The advanced bobbin technology increased the durability, all coil products were validated with most strict performance and environmental test, resists shock and vibration. Secondary contacts are made of brass, maximum the energy transfer to spark plug.
This is a set of eight (8) brand new, high quality direct fit Copper Ignition Coils with boots & springs.
Lifetime Warranty+ 100% Satisfaction Guarantee & 30-Days Money Back.
These coils are of superior quality & are ISO9001 Certified for quality assurande.
Super high di-electric performance epoxy & Superior quality copper wire & Super high conductive coil
Feature:
Brand: PAL
Coil Wire Attachment: Female/Socket
Coil Style: Coil pack
Primary Resistance: 0.660 ohms
Coil Internal Construction: Epoxy
Coil Color: Yellow
Maximum Voltage: 26,000 V
Turns Ratio: 61:1
Secondary Resistance: 6.1K ohms
Mounting Bracket Included: No
Coil Wire Included: No
Ballast Resistor Included: No
Part number cross reference:
DG508, DG491, DG508, E222, F523, F7TU-12A366AB , FD503,COP9,3W7Z12029AA FD79 13062237, 1972290, 1L2U12029AA, 1L2U12A366AA, 1L2Z12029AA, 1L2Z12029AC, 21941483, 21941485, 21941505, 3W7Z12029AA, 71HM12300AA, 72HF12300AA, 75HF12300AA, 88921369, A780X12300HA, C409, C469, C471, D1FZ12300A, D1RY12300A, DC263, DC88, DCE258, DCE261, DCE263, DG467, DG473, DG481, F7TU12A336CB, F7TU12A366AB, F7TU12A366BA, F7TU12A366CC, F7TU12A366CD, F7TZ12029AB, F7TZ12029BA, F7TZ12029CA, F7TZ12029CB, F7TZ12029CC, FD493, FD503, FD79X
Package Includes:
8X PAL Coils
Notes: Fits 2-valve engines only.
Fits Vehicles:
Ford Crown Victoria 4.6L V8 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
Ford E-450 Super Duty Stripped Chassis 5.4L V8&6.8L V10 2003
Ford E-550 Super Duty 6.8L V10 2003
Ford F-150 Heritage 4.6L V8 2004
Ford Econoline Super Duty 5.4L V8&6.8L V10 1997 1998 1999
Ford Excursion 5.4L V8&6.8L V10 2000 2001 2002 2003 2004 2005
Ford Expedition 4.6L V8 & 5.4L V8 2000 2001 2002 2003 2004
Ford Explorer 4.6L V8 2002 2003 2004 2005
Ford E-350 5.4L V8&6.8L V10 2003
Ford Mustang 4.6L V8 SOHC 1999 2000 2001 2002 2003 2004
Ford E-150 4.6L V8&5.4L V8 2003 2004 2005 2006 2007 2008 2009 2010 2011
Ford E-150 Club Wagon 4.6LV8&5.4L V8 2003 2004 2005
Ford E-150 Econoline 4.6L V8&1997~2002 5.4L V8 1999 2000 2001 2002
Ford E-150 Econoline Club Wagon 4.6L V8&5.4L V8 2000 2001 2002
Ford E-250 4.6LV8&5.4L V8 2003 2004 2005 2006 2007 2008 2009
Ford E-250 Econoline 5.4L V8 1997 1998 1999 2000 2001 2002
Ford E-250 Super Duty 5.4L V8 2003 2004 2005
Ford E-350 Club Wagon 5.4L V8& 6.8L V10 2003 2004 2005
Ford E-350 Econoline 5.4L V8&6.8L V10 1997 1998 1999 2000 2001 2002
Ford E-350 Super Duty 5.4L V8&6.8L V10 2004 2005 2006 2007 2008 2009
Ford E-450 Econoline Super Duty 5.4L V8&6.8L V10and Stripped 5.4L V8& 6.8L V10 2000 2001 2002
Ford E-450 Super Duty 5.4L V8&6.8L V10 2003 2004 2005 2006 2007 2008 2009
Ford F-150 5.4L V8 1997 1998 1999 2000 2001 2002 2003
Ford F-150 4.6L V8 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
Ford F-250 5.4L V8 1997 1998 1999
Ford F-250 Super Duty 5.4L V8&6.8L V10 1999 2000 2001 2002 2003 2004
Ford F-350 Super Duty 5.4L V8 1999 2000 2001 2002 2003 2004
Ford F-350 & F450 &F550 Super Duty 6.8L V10 1999 2000 2001 2002 2003 2004
Lincoln Town Car 4.6L V8 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
Lincoln Navigator 5.4L V8 SOHC-Note for 1998 Navigator.*These fit SOHC only* 1999 uses a DOHC. 9/98 on door sticker means 1999 ( 1998 )
Mercury Grand Marquis 4.6L V8 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
Mercury Mountaineer 4.6L V8 2002 2003 2004 2005
Advantage：
BEST IGNITION COIL PACK AVAILABLE - Our ignition coil are tested and meet or exceed performance requirements,buy Precision Auto Labs ignition coil can save over $50-$100 in US auto parts store
HIGH QUALITY MATERIAL SELECTION - Our ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
FEATURES - Each coil is design for specific application, low-emissions, and high energy output, and they will eliminate misfires and provide maximum voltage
COMPATIBLE VEHICLES - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase
Installation:
First: Prepare the tools, park the car, and open the engine compartment
Second:Loosen the screws of the upper cover of the engine in the picture, and remove the upper cover of the engine
Third:Pull out the tube in the picture and put it aside (pay attention to the temperature of the engine to avoid scalding. When pulling out the vacuum tube, don't use too much force to avoid damage)
Fourth:Use the ignition coil tool to pull up the ignition coil (note that the pulling force should not be too strong, pull it slowly, otherwise it will easily break the ignition coil connection wire)
Fifth:Unplug the ignition coil connecting wire clip and take out the ignition coil
Sixth:Put the new ignition coil into the engine, and fasten the ignition coil connecting wire clip, as shown in the figure, align the limit buckle and press the ignition coil tightly.
Seventh:Install the unplugged pipe and restore it to its original appearance
Eighth:Start the vehicle and use the detector to detect whether there is a fire. If there is no fire, turn off the vehicle, install the engine cover, and then cover the engine compartment cover
Payment
Shipping
Returns
Feedback
About US
Warranty
Fast & Free Shipping
Return Policy
Payment Method
Shop Category New List Item
Hot Item
|
8 Ignition Coil Pack For Ford F150 Expedition 2000 2001 2002 2003 2004 4.6L 5.4
Notes: Please check the vehicles above for your exact vehicle year, model and engine type before ordering.
Direct plug-in replacement coil, Features top grade silicone magnetic steel , and German copper wire and high temperature epoxy. The internal winding design is optimized for higher energy racing application. It deliver 15% more energy than other coils, The advanced bobbin technology increased the durability, all coil products were validated with most strict performance and environmental test, resists shock and vibration. Secondary contacts are made of brass, maximum the energy transfer to spark plug.
Feature: Brand: PAL Coil Wire Attachment: Female/Socket Part number cross reference: DG508, DG491, DG508, E222, F523, F7TU-12A366AB , FD503,COP9,3W7Z12029AA FD79 13062237, 1972290, 1L2U12029AA, 1L2U12A366AA, 1L2Z12029AA, 1L2Z12029AC, 21941483, 21941485, 21941505, 3W7Z12029AA, 71HM12300AA, 72HF12300AA, 75HF12300AA, 88921369, A780X12300HA, C409, C469, C471, D1FZ12300A, D1RY12300A, DC263, DC88, DCE258, DCE261, DCE263, DG467, DG473, DG481, F7TU12A336CB, F7TU12A366AB, F7TU12A366BA, F7TU12A366CC, F7TU12A366CD, F7TZ12029AB, F7TZ12029BA, F7TZ12029CA, F7TZ12029CB, F7TZ12029CC, FD493, FD503, FD79X
Package Includes: 8X PAL Coils
Notes: Fits 2-valve engines only.
Fits Vehicles: Ford Crown Victoria 4.6L V8 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
Advantage： BEST IGNITION COIL PACK AVAILABLE - Our ignition coil are tested and meet or exceed performance requirements,buy Precision Auto Labs ignition coil can save over $50-$100 in US auto parts store HIGH QUALITY MATERIAL SELECTION - Our ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues FEATURES - Each coil is design for specific application, low-emissions, and high energy output, and they will eliminate misfires and provide maximum voltage COMPATIBLE VEHICLES - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase
Installation:
First: Prepare the tools, park the car, and open the engine compartment
Second:Loosen the screws of the upper cover of the engine in the picture, and remove the upper cover of the engine
Third:Pull out the tube in the picture and put it aside (pay attention to the temperature of the engine to avoid scalding. When pulling out the vacuum tube, don't use too much force to avoid damage)
Fourth:Use the ignition coil tool to pull up the ignition coil (note that the pulling force should not be too strong, pull it slowly, otherwise it will easily break the ignition coil connection wire)
Fifth:Unplug the ignition coil connecting wire clip and take out the ignition coil
Sixth:Put the new ignition coil into the engine, and fasten the ignition coil connecting wire clip, as shown in the figure, align the limit buckle and press the ignition coil tightly.
Seventh:Install the unplugged pipe and restore it to its original appearance
Eighth:Start the vehicle and use the detector to detect whether there is a fire. If there is no fire, turn off the vehicle, install the engine cover, and then cover the engine compartment cover |
