|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 Pack Ignition Coils and Spark Plugs For Ford F-150 4.6/5.4L V8 DG511 2004-201
Description:
Direct plug-in replacement, Features top grade silicone magnetic steel , and German copper wire and high temperature epoxy. The internal winding design is optimized for higher energy racing application. It deliver 15% more energy than other coil, The advanced bobbin technology increased the durability, all coil products were validated with most strict performance and environmental test, resists shock and vibration. Secondary contacts are made of brass, maximum the energy transfer to spark plug.
1. Wire--Imported from German Elektrisoal,top quality in the world.
2. Epoxy-- Imported from German Elektrisoal,top quality high insulation epoxy.
3. Plastic—GE Valox resin, professional high voltage di-electric resistant resin.
4. Manufactured in facility TS16949 quality control system certified.
This is a set of eight (8) brand new, high quality direct fit Ignition Coils with boots & springs.
lifetime Warranty 100% Satisfaction Guarantee & 30-Days Money Back.
These coils are of superior quality & are ISO9001 Certified for quality assurande.
Super high di-electric performance epoxy & Superior quality copper wire & Super high conductive coil
Other Part Number:
5C1584, E508, 52-1839, IC558, 3L3E-12A366-CA, 3L3Z-12029-BA, DG511, FD-508, UF-537, C1541
Part number cross reference:
3L3Z12029BA-3L3E12A366CA, 3L3Z12029BA-3L3U12A366BB, PZT14F, HT15, PZH14F
PZH14F, HT15, PZT14F, SP507, SP515, SP546, GN10182, 5C1584, 50082, E508
SP515, SP546, DG511, DG-511, FD508, C1659, C1541, C1659, DQ50101D, UF537, UF-537
3L3Z12029BA-3L3E12A366CA, 3L3Z12029BA-3L3U12A366BB
Features:
Input Voltage: DC 12V
Connector Gender:Female
Terminal Gender:Male
Connection: 2 Pins
Terminal Type: Blade
Product build in coil boot and spring within its assembly
Copper Windinga inside with better connectivity
Designed to deliver trouble-free, consistent performance
Improved coil efficiency reduces the need to generate high voltage, right for your vehicle and lifestyle
Excellent mechanical stability and corrosion protection
Lower fuel consumption and reduced exhaust emissions for your vehicle
Manufactured to meet or exceed strict quality requirements
Fitment:
For 2005-2008 Ford Expedition 5.4L V8
For 2006-2008 Ford Explorer4.6L V8
For 2007-2008 Ford Explorer Sport Trac4.6L V8
For 2004-2008 Ford F-150 5.4L V8
For 2005-2008 Ford F-250 Super Duty 5.4L V8
For 2005-2008 Ford F-250 Super Duty 6.8L V10
For 2005-2008 Ford F-350 Super Duty 5.4L V8
For 2005-2008 Ford F-350 Super Duty 6.8L V10
For 2005-2007 Ford F-450 Super Duty 6.8L V10
For 1999-2007 Ford F-550 Super Duty 6.8L V10
For 2005-2008 Ford Mustang 4.6L V8
For 2006-2008 Lincoln Mark LT 5.4L V8
For 2005-2008 Lincoln Navigator 5.4L V8
For 2006-2008 Mercury Mountaineer 4.6L V8
Package includes:
8x Ignition coils (Red)
8x Spark Plugs
Why Our Customers Keep Shopng With Us:
✅All Items Are Covered By Manufacturer Warranty.
✅Fast Free Shipping.
✅Most Orders Ship Within 1 Business Day With Tracking Number.
✅100% Customer Satisfaction Is Backed By a 30-Day Money Back Guarantee For New Items And a 30-Day Money Back Guarantee For Recon.
Free Return:
If You Are Unhappy With Your Purchase For Any Reason, You Can Return It To Us In An Un-Used Condition In The Original Packaging Within 30 Days Of Purchase And We'Ll Give You a Refund Or Exchange. The Refund/Exchange Will Not Include Postage/Ebay Costs. Please Note You Must Contact Us To Obtain a Return Authorization Number Before Returning Any Part. Any Parcel Without The Return Authorization Number Will Be Rejected
*If Your Item Is Faulty Or Was Incorrect, You Must Contact Our Sales Representative Before Returning The Parcel And We Will Endeavour To Solve The Problem Effectively. Video Or Picture Is Required To Show The Item 、Condition Before We Issue The Return Authorization Number.
* Professional Installation Is Highly Recommended (No Instruction Included)
* For Any Needs Please Contact Us
Note:
-Please check and confirm the item is work for you before purchasing,thanks!
-If you have any questions, please contact us for more details!
Why choose us?
PAL produce the coils only with the top quality material to ensure the performance and durability.
Our ignition coils are high performance, have 15% more enegy than coils.
1. Wire--Imported from German Elektrisoal,top quality in the world.
2. Epoxy-- Imported from German Elektrisoal,top quality high insulation epoxy.
3. Plastic?GE Valox resin, professional high voltage di-electric resistant resin.
4. Certified by TS16949 quality control system .
Installation:
First: Prepare the tools, park the car, and open the engine compartment
Second:Loosen the screws of the upper cover of the engine in the picture, and remove the upper cover of the engine
Third:Pull out the tube in the picture and put it aside (pay attention to the temperature of the engine to avoid scalding. When pulling out the vacuum tube, don't use too much force to avoid damage)
Fourth:Use the ignition coil tool to pull up the ignition coil (note that the pulling force should not be too strong, pull it slowly, otherwise it will easily break the ignition coil connection wire)
Fifth:Unplug the ignition coil connecting wire clip and take out the ignition coil
Sixth:Put the new ignition coil into the engine, and fasten the ignition coil connecting wire clip, as shown in the figure, align the limit buckle and press the ignition coil tightly.
Seventh:Install the unplugged pipe and restore it to its original appearance
Eighth:Start the vehicle and use the detector to detect whether there is a fire. If there is no fire, turn off the vehicle, install the engine cover, and then cover the engine compartment cover
Payment
Shipping
Returns
Feedback
About US
Warranty
Fast & Free Shipping
Return Policy
Payment Method
Shop Category New List Item
Hot Item
|
8 Pack Ignition Coils and Spark Plugs For Ford F-150 4.6/5.4L V8 DG511 2004-201
Description:
Other Part Number:
Package includes:
Why Our Customers Keep Shopng With Us: ✅All Items Are Covered By Manufacturer Warranty. ✅Fast Free Shipping. ✅Most Orders Ship Within 1 Business Day With Tracking Number. ✅100% Customer Satisfaction Is Backed By a 30-Day Money Back Guarantee For New Items And a 30-Day Money Back Guarantee For Recon.
Free Return: If You Are Unhappy With Your Purchase For Any Reason, You Can Return It To Us In An Un-Used Condition In The Original Packaging Within 30 Days Of Purchase And We'Ll Give You a Refund Or Exchange. The Refund/Exchange Will Not Include Postage/Ebay Costs. Please Note You Must Contact Us To Obtain a Return Authorization Number Before Returning Any Part. Any Parcel Without The Return Authorization Number Will Be Rejected *If Your Item Is Faulty Or Was Incorrect, You Must Contact Our Sales Representative Before Returning The Parcel And We Will Endeavour To Solve The Problem Effectively. Video Or Picture Is Required To Show The Item 、Condition Before We Issue The Return Authorization Number. * Professional Installation Is Highly Recommended (No Instruction Included) * For Any Needs Please Contact Us
Note: -Please check and confirm the item is work for you before purchasing,thanks! -If you have any questions, please contact us for more details!
Why choose us?
Installation:
First: Prepare the tools, park the car, and open the engine compartment
Second:Loosen the screws of the upper cover of the engine in the picture, and remove the upper cover of the engine
Third:Pull out the tube in the picture and put it aside (pay attention to the temperature of the engine to avoid scalding. When pulling out the vacuum tube, don't use too much force to avoid damage)
Fourth:Use the ignition coil tool to pull up the ignition coil (note that the pulling force should not be too strong, pull it slowly, otherwise it will easily break the ignition coil connection wire)
Fifth:Unplug the ignition coil connecting wire clip and take out the ignition coil
Sixth:Put the new ignition coil into the engine, and fasten the ignition coil connecting wire clip, as shown in the figure, align the limit buckle and press the ignition coil tightly.
Seventh:Install the unplugged pipe and restore it to its original appearance
Eighth:Start the vehicle and use the detector to detect whether there is a fire. If there is no fire, turn off the vehicle, install the engine cover, and then cover the engine compartment cover
|
