New-Old-Stock 3T 2002 Evol Quill Stem w/Gray Finish (25.8 mm / 26.0 mm clamp x 110 mm length)...Hinged Clamp Design (Cosmetic Second)
Thank you for your interest in this item and please visit our store for other offerings. We have very reasonable shipping terms and combine orders to save money (for customers) on shipping costs. We also maintain customer friendly return/refund/exchange policies.
Product Description:

This item for sale is a new-old-stock 3T 2002 Evol quill stem. These Italian made stems are very good quality, as they are forged from an aluminum alloy (AL 6082) and were positioned as one of 3T's "Racing Team Services" quill stems (so manufactured to withstand the stresses and demands of competitive cycling/racing). The gray (anodized) finish is clean and compliments the stem's slightly bulkier/oversized styling (relative to other racing series quill stems we sell from 3T). Some of it's more prominent design features and specs include the following...

  • Body length: 110 mm (measured from a profile view of the stem body as a straight line that extends from the center of the quill to the center of the bar clamp)

  • Body angle: 72 degrees (or said another way...a negative 18 degree rise)

  • Quill length: 75 mm (the distance between the limit line and the top of the quill...inclusive of the dust cover, if applicable)

  • Clamp: 25.8 to 26.0 mm (fairly common sizing for many vintage drop handlebars)

  • Quill diameter: 22.2 mm (common size compatible with most 1" threaded forks)

  • Weight: 280 grams (per our digital postal scale and inclusive of all mounting hardware)

Probably the most notable feature of this particular model is the hinged stem clamp, which is an extremely nice (and convenient) feature, as the hinge will open wide enough to allow for a set of bars to mount with levers, bar tape, etc., already installed. As a result, this hinged clamp design maintains the flexibility and convenience of a detachable face-plate design (similar to the Motus stem...as one example). Please do note, however, to take care when removing and installing this plastic/resin cover that conceals the hinge. This cover snaps into place by lining-up small pegs with matching peg holes located around the hinge...and the cover must be removed to achieve the full range of motion of the hinge when swapping out bars.

This stem also has the cylinder-shaped expander with the patented cone...so the fit in the steerer tube of the fork should be secure. Overall, this might be our personal favorite of the 3T racing series quill stems (for what it's worth)...and although this model is a little heavier relative to some other 3T models, we believe it to be one of the stiffest quill stems on the market.

We are spending a little more time inspecting each of these retail boxed stems, as we near the end of our stocks. Honestly, we may be splitting hairs with some of these inspections, as none of them are cosmetically perfect upon close scrutiny. Although, any cosmetic issues are usually fairly minor and may consist of, among other things, small blemishes in the form of forging/finishing imperfections coming out of the factory. In other words, we sometimes observe small/shallow dimples, pin-sized holes, thin lines, etc. in the stem body that appear to be the result of an imperfect forging process. We believe this to be something that occurred at the factory, because the anodized finish does not appear to be disturbed in these areas...meaning the finishing/anodizing process was completed after the forging imperfections were created. We also see some instances where the stem may not have been properly cleaned prior to the anodized finishing work. More specifically, there may be some other small cosmetic irregularities on the stem body (i.e., there may be some small/residual metal pieces, etc. that should have been cleaned/removed from the stem body, but were instead covered by the anodized finish). Lastly, we will sometimes identify some shopwear (i.e., light scuffs/scratches) in the anodized finish that is likely the result of several years of storage time. Listing Update...We have begun updating the pictures to reflect the next stem that will sell/ship. Although, please keep in mind the minor blemishes and shopwear do not always show up as well in the pictures as I would like...and just want to be honest with folks on this point. To this end, I see some forging/finishing imperfections on this stem body and some shopwear. I've also attempted to take close-up pictures of these areas and you can make-out some of the cosmetic imperfections in the pictures, but it's not easy, because we are talking about fairly small/cosmetic blemishes. If I were to point out one of the cosmetic blemishes that is the most visible, it would be a forging imperfection on the top left side edge of the stem body. It looks like a small dent our gouge in the aluminum alloy, but its more likely a factory forging blemish because the anodize gray finish covers this area. I also want to point out that this is a more noticeable cosmetic blemish compared to our normal stocks, so we will offer this one unit at a modest discount from our regular stocks.

Terms and Conditions:

You may visit our store by clicking on this "Store Home Page" link and please note the product categories on the left side of our "Store Home Page".

We have also moved our "Terms and Conditions" to a separate page within our Ebay store. You may navigate to this page by clicking on the link on the left side of our "Store Home Page" (below the product categories) or you may click on one of our "Terms and Conditions" direct links herein.

Note to international customers regarding shipping...
We apologize to those that feel some of our international shipping charges are too high. We only charge actual shipping rates, but once an order exceeds a certain amount, we hesitate to use the least expensive US Postal Services First Class International service. We feel this way, because this service is not trackable or insurable...so more risk of loss. We prefer the US Postal Services Priority Mail International service for more expensive orders, because this service is trackable at USPS.com and insurable...so less risk of loss. Unfortunately, this service is more expensive, especially for smaller/lighter packages, relative to the First Class International service. We are sorry about these higher shipping costs, but hopefully our notes help to explain why this is the case.

Note to international customers regarding customs...
We also apologize to those that feel their country import taxes, duties and brokerage fees are excessive. As a small US business, we are required by customs' laws to declare each order as a retail sale. Additionally, the declared order value must be equal to total store purchases and/or winning auction bids (less any shipping costs, as these are not considered in the declared value). As a result, each customer will be responsible for paying his/her own country taxes, duties and brokerage fees, which will be collected upon delivery. Again, we apologize for these additional costs, but we cannot afford the penalties and fines that come with breaking customs' laws...so we have to strictly abide by them.