*NEW* Matsusada Precision model:
KA-10P-LX ; High-Voltage Power Supply;
Adjustable 0V to 10KV @ 1mA (10W)
Applications: SEM and Electron Beam / Ion Beam; MASS Accelerator
Dimensions: 7.1" L x 3.75" W x 1.75" H
High-Stability: typical 10ppm for 5-min; 50ppm for 1-hour.
Low Noise: typical 10ppm
Positive Output: Adjustable 0V to 10KV @ I-out = 1mA (10W)
HV Output cable: HV Shielded; 1m length. (Load connected Core-to-Shield)
Input Supply Voltage: 24VDC +/- 1V at 1 Amp typical. (Pin 2 = +24; Pin 10 = 24RTN=CASE)
Output Voltage Control: Via an external 20Kohm potentiometer (Pins 4 & 9; wiper = Pin 5), or external control voltage of 0-10VDC.
(Zin typical = 100Kohm.)
TempCoe: typical 25ppm/'C
Protection: Short-circuit and Arc protected. (Avoid continuous short-circuit!)
Remote ON/OFF Switch: Short = HV-ON; Open = HV-OFF
Control Signal I/O = 10Pin MOLEX Connector
Current Monitor Pin: 0-10V (Pin 8 to Pin 9)
Voltage Monitor: 0-10V (Pin 3 to Pin 9)