Store Categories
UNIMIG E71T-11 MIG WELDING WIRE
Product information
| What You Get: |
|---|
5kg x UNIMIG E71T-11 MIG Welding Wire *Note: if out of stock, an alternative brand of the same or higher quality will be sent |
Free Wire Promotion: ANY Combination of 2 rolls purchased will receive 10 x 125mm Tricraft Cutting Disks (Worth $25) |
Choose your Wire Size: 0.8mm / 0.9mm / 1.2mm |
UNIMIG E71T-11 Wire Features: |
Self Shielded Flux Core wire |
Suitable for single pass applications |
Smooth arc action |
DC-No shielding gas required |
Excellent on galvanised / mild steel |
General repairs and maintenance |
| Specifications: |
|---|
Part Number: XA-E71T11-08 (0.8mm Wire) XA-E71T11-09 (0.9mm Wire) XA-E71T11-09 (1.2mm Wire) |
| Shielding Gas: None Required |
| Welding Polarity: DCEN (Electrode Negative, Straight Polarity) |
| Position: All positional welding |
| Welding Type: MIG |
Outside Diameter Spool: 5kg = 200mm |
| Certifications: AWS A 5.20 : ASME SFA 5.20 |
| Features: |
|---|
UNIMIG E71T-11 Gasless MIG Wire is a general-purpose self-shielded flux-cored wire designed for all position, single-pass and limited multiple-pass lap, fillet and butt welds on mild or galvanized steel. |
E71T-11 Gasless MIG Wire is easy to use because it requires no shielding gas. |
It has a smooth arc action, full slag coverage, easy slag removal and low spatter. |
Excellent for use on thicker gauges of galvanised and mild steel. |
Travel speed is high and weld edges are smooth. |
The use of DC straight polarity welding current minimises the risk of burn through. |
Deposition efficiency is higher than that of shielding metal arc electrodes. |
E71T-11 Gasless MIG Wire is commonly used in the fabrication of structural beams on outdoor construction projects where adverse weather conditions hinder the flow of gas or where gas cylinders are not an option for logistical reasons. |
Certifications and safety standards

You may also like