USB Rechargeable LED Tactical Flashlight with Battery

bright flashlight night light
The ultimate LED tactical USB rechargeable flashlight kit. This flashlight offers 2000 lumens of bright light with a Made in USA CREE XHP50 LED chip. This super bright LED flashlight offers 3 different preset light modes (High, Low, Strobe). An adjustable zoom function comes in handy and delivers a wide-to-narrow light beam to focus in on objects up to 1000 feet away. The USB rechargeable flashlight offers a dual tail switch for instant activation and when the flashlight is powered off, simply hold down the small button to activate the strobe light. To recharge the flashlight, twist the head of the flashlight to access the charging port and insert the USB Type-C cable.

Bright Rechargeable Tactical Flashlight

First Time Usage Notes

Engage Rechargeable Battery: Remove the tail-cap by turning counter-clockwise. Remove the round plastic located on top of the battery and replace the tail-cap.

Zoom Focus Function: To use the zoom function, "twist" the head of the flashlight clockwise to zoom in. Twist counterclockwise to zoom out.

Charging Port: To access the charging port, "twist" the head of the flashlight clockwise. There is a USB icon that indicates the location of the charging port. Plug-in the Type-C end of the USB cable into the flashlight charging port. Plug the USB end of the cable into a power source. The red light will remain on continuously until fully charged (about 6-8 hours for a full charge). Once the charging is complete, a green light will activate.

Product Specifications

LED Bulb: CREE XHP50
Voltage: 3.7V
Dimensions: 1.38” x 6.14” / 35 x 156 mm
Weight: 4.23 oz / 120 g (excluding battery)
Material: Aluminum
Brightness: 2000 lumens max
Protection: IP67 (dust and waterproof)

Package Includes

> TK2000 Flashlight
> 5000mAh Rechargeable Battery (3.7V 18.5Wh)
> Belt Clip
> Spare O-Ring
> USB Type-C Charging Cable
> User Manual

Note: The product packaging and user manual indicates there is a "Lanyard". This is a typo and should actually indicate there is an attached Belt Clip.

Operating Instructions:

Charging Port Access: The port is intentionally hidden to prevent water and other debris from damaging the flashlight.

1. With the flashlight head pointed away from you, twist to the LEFT to re-tighten the body of the flashlight.
2. Then, carefully twist the head of the flashlight to the RIGHT to access the charging port.

Light Modes: To change from High to Low light mode, power on the flashlight using the large button. Then click the small button to cycle from High to Low light mode.

Adjustable Zoom Function: To activate the zoom function, you will need to twist the head of the flashlight to the RIGHT.

Please reference the product images for further clarification.
View Charging Port Access