The heavy duty screw in ground anchor stake is for even more ground varieties than the shorter 12" GroundGrabba Pro.

• FAST STRONG & SECURE: Our in ground anchor takes only seconds to install/extract using a quality cordless drill or impact wrench. On hard or extremely hard grounds, we highly recommend using our Masonry Drill Bit by pre-drilling a 1/2" (12mm) pilot hole to help with the insertion of our twist in ground anchors. Please note that some grounds will be impenetrable!
• SUPERIOR BUILD: We designed high quality materials for the perfect product to give unmatchable durability and functionality when you need it the most. We pride ourselves in making high-quality, Heavy Duty Screw in Stakes made of Galvanized Heat Treated Carbon Steel at 1ft in length they will get you the maximum grip you’ve been looking for.
• LIFETIME WARRANTY: Our diy ground anchor materials are designed to last a lifetime. With the superior quality of the GroundGrabba Pro, we guarantee you’ll not only love the camping ground anchor, but you’ll use it time and time again for any project. OUR “100% SATISFACTION” PROMISE: Not a fan? Return it within 30 days upon purchase for a full refund.
• SAFE & SECURE: Perfect for the outdoors, our ground anchor systems will remain intact and safe even under the most extreme weather conditions so you can feel confident in whatever you are anchoring. Whether your anchoring playground equipment or tethering dog leashes, you can rest assured in knowing your new ground anchor spikes will hold almost anything down.
• 12 Pack of Stakes

• 12 Pack: 12x GroundGrabba Pro I

• Free 4 Day Shipping

• Made of Heat-Treated Carbon Steel
• Hot Dipped and Spray Galvanised for anti-corrosion
• Weight 1 pound
• Length 18″
• Shaft thickness .39″
• Flights (spirals) 1/2″ wide, .07″ thick
• 3/4″ hex head with 1″collar
• Can screw through a special GroundGrabba HookWasher
• Overall diameter = 1 3/8"

Weight: 13 Ounces
Dimensions: 18 × 1 × 1.5 in

GroundGrabba Pro I is a heavy duty screw in ground anchor stake. For most ground varieties including sand. 

• Peg-stake flights tear into the substrate for an amazing grip
• Drill action operates smoothly for simple, fast insertion
• Lightening-fast setup and pull down
• Can be used for permanent ground anchoring
• Perfect addition to your camping equipment arsenal.
• As an option, to help drive your GroundGrabba's into the ground we offer 3/4" Hex Driver sockets to fit your drill or both Masonry Drill bit (for drilling a pilot hole in harder grounds) and 3/4" socket combination.
• Help keep all your GroundGrabba and accessories together with a top quality heavy duty carry-all bag made especially for GroundGrabba.

With the GroundGrabba Pro I, it doesn’t matter if you need reliable metal stakes to ground your camping tent or shade structure in the desert or are putting up signs around your business. Perhaps setting up vendor tent, easy up, gazebos for a party or event, tying down patio furniture, or setting up your pop up carport, outdoor swing set or light aircraft.

With our galvanised heat treated carbon steel metal ground anchor stakes, you can feel confident that whatever you are anchoring will remain intact and safe, regardless of weather conditions.

Please Note: These are not toys. You will need a powerful drill if attempting to use these in hard ground.

⚠ Caution:

❌  Do not use in grounds where there are underground services such as but not limited to: electricity, gas, phone, data, water. 

❌  Do not use GroundGrabba products for any other purpose other than ground anchoring.

❌  Not for timber, concrete, rock, bitumen, hot mix, tiles or Hard Large rocky grounds.

• Misuse or abuse of GroundGrabba products can lead to injury or worse to the user or bystanders. 
• Not to be used with mains powered drills. 
• When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products. 
• Only use GroundGrabba products for their intended purpose of ground anchoring things such as tents and shade canopies. 
• Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury. 
• Always start your drill on the lowest torque setting. 
• Use a good quality high torque drill or impact wrench. 
• For hard or extremely hard grounds we recommend pre drilling a minimum of a 1/2" pilot hole to help with insertion.
• Some grounds will be impenetrable. 
• Use the correct GroundGrabba for the job.