CFL CONVERTER LEAD - UK PLUG

If you want to use a CFL lamp with an IEC reflector - you can! The LUMii HID to CFL Converter Set allows IEC reflector leads to convert to a wall plug lead. This kit contains a short additional cord set (UK or EU Plug available) to convert the supplied IEC to a conventional power supply. In addition there is an innovative support device (for use with the LUMii MAXii reflector) to assist with the additional weight of a CFL lamp.

LUMii 1.5m OR 5M HID EXTENSION LEAD

The LUMii HID Reflector Extension Lead is available in 1.5m and 5m lengths. Suitable for use with all LUMii and IEC reflectors. Please make sure that when you are using extension leads for HID, your ballast is built to ignite the lamp over long distances. PowerPlant and LUMii ballasts are able to ignite a lamp from up to 15 metres from the ballast

POWERPLANT HEAVY DUTY TIMER

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on. The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast. This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minues). This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers.

UK PLUG TO IEC WITH A TWO METRE CABLE - 13AMP.

4 OR 6 GANG EXTENSION LEAD

Four Sockets for UK Plugs (Type G)

Unswitched

2 OR 5 Metre Length

UK Plug with a 13 Amp Fuse

Conforms to BS1363/A

GAVITA POWER CORD UK 240V IEC C13 - 5m

The Gavita Power Cord delivers power to appliances and is 5m long.