EVERPURE® 7CB5-K FILTER CARTRIDGE

Applications
· Ice
· Special problem solving cartridge

Carbon block filter finely polishes water for high quality beverage and food applications Features KDF® Media which inhibits microbial buildup (as tested by KDF) Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination NSF® Certified under NSF/ANSI Standard 42 Sanitary cartridge replacement is simple, *As tested by Pentair® Everpure

Reduces chlorine taste and odor and other offensive contaminants that can adversely affect the taste of water and beverages Reduces extra fine dirt and particles as small as five (5) microns in size Saves energy by reducing limescale build-up* that can cause excessive machine downtime and increased maintenance costs *As tested by Pentair® Everpure

INSTALLATION TIPS

Install vertically with cartridge hanging down

Allow 2-1/2" (6.35 cm) clearance below the cartridge for easy cartridge replacement

Flush cartridge by running water through system for five (5) minutes at full flow

OPERATION TIPS

Change cartridges on a regular six (6) month preventative maintenance program

Change cartridges when capacity is reached or when pressure falls below 10 psi (0.7 bar)

Always flush the filter cartridge at time of installation and cartridge change

SIZING

Service Flow Rate: Maximum 2.5 gpm (9.46 Lpm)

Capacity: 10,000 gallons (37,854 L)

• Overall Dimensions 20.75" L x 3.25" dia. (52.7 x 8.2 cm)

• Capacity 10,000 gallons (37,854 L)

• Maximum Static Pressure Requirements 100psi (6.89 bar), non-shock

• Service Flow Rate Maximum 2.5 gpm (9.46 Lpm)

• Pressure Requirements 10 - 125 psi (0.7 - 8.6 bar), non-shock

• Temperature 35 - 100°F (2 - 38°C)
  

• Electrical Connection None required

Filter to effectively reduce the sediment, chlorine, taste & odours.

• 99.30% of Lead at pH 6.5

• 99.90% of Lead at pH 8.5

• 94.50% of Mercury at pH 6.5

• 96.60% of Mercury at pH 8.5

• 97.60% of Partculates (Class 1) 

• 89.60% of Benzene

• 99.90% of P-Dichlorobenzene

• 99.99% of Cysts

• 98.70% of Carbofuran

• 97.00% of Chlorine

• 99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)

Toxaphene

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour.

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.