Due to the huge number of WeMos copies available, WeMos changed their brand to "LOLIN" by WeMos on 27th April 2018.
This listing includes their latest generation of ESP8266 and ESP32 modules and shields with easy plug and play I2C connectors
Please see my other listing here for the other shields and MCUs.
See my other ESP32 boards here
LOLIN D1 Mini Pro V2.x
- Genuine LOLIN by WeMos product
- Current version V2.0.0
- LOLIN I2C Port
- 11 digital input/output pins
- Interrupt/PWM/I2C/one-wire
- 1 analog input(3.2V max input)
- 16M bytes(128M bit) Flash
- External antenna connector
- Built-in ceramic antenna
- Lithium battery interface, 500mA Max charging current
- Compatible with Arduino, MicroPython, NodeMCU
- Default firmware: lastest MicroPython
- Shipped with pins and a battery connector.
LOLIN D32
- Genuine LOLIN by WeMos product
- Current version V1.0.0
- Espressif official ESP32-WROOM-32 module
- Lastest ESP32 Version: REV1
- 4MB FLASH
- Lithium battery interface, 500mA Max charging current
- Compatible with Arduino, MicroPython
- Default firmware: lastest MicroPython
- Pinout is not compatible with the D1 Mini Shields.
- Shipped with pins and a battery connector
LOLIN D32 Pro
- Genuine LOLIN by WeMos product
- Current version V2.0.0
- Espressif official ESP32-WROVER module
- Lastest ESP32 Version: REV1
- 16MB FLASH
- 8MB PSRAM
- Lithium battery interface, 500mA Max charging current
- LOLIN I2C port
- LOLIN TFT port
- Pinout is not compatible with the D1 Mini non-I2C Shields.
- TF (Micro SD) Card slot, support SPI mode.
- Compatible with Arduino, MicroPython
- Default firmware: lastest MicroPython
- Shipped with pins and a battery connector.
LOLIN32 Lite clone
- Genuine Espressif ESP32 module on a generic board
- 4MB FLASH
- Lithium battery interface
- Shipped with pins and a battery connector.
2.4 inch TFT Touch Display
- Genuine LOLIN by WeMos product
- Current version V1.0.0
- 2.4” diagonal LCD TFT display
- 320×240 pixels
- TFT Driver IC: ILI9341
- Touch Screen controller IC: XPT2046
- Compatible with D1 mini, D1 mini Pro, D32 Pro.
- 3 kinds of connection
- Shipped with a ten pin connector cable
2.13 inch Tri-Colour ePaper eInk Display
- Genuine LOLIN by WeMos product
- Current version V1.0.0
- 2.13” diagonal ePaper eInk display
- 250×122 pixels
- Compatible with D1 mini, D1 mini Pro, D32 Pro.
- Shipped with a ten pin connector cable
OLED 0.96 Shield
- Genuine LOLIN by WeMos product
- Screen Size: 128x64 pixels
- Operating Voltage: 3.3V
- Driver IC: SSD1306 (I2C Address: 0x3D or 0x3C)
- Shipped with an I2C cable, please leave a message if you want one with loose ends.
OLED 0.49 Shield
- Genuine LOLIN by WeMos product
- Screen Size: 64x32 pixels (0.49” Across)
- Operating Voltage: 3.3V
- LOLIN I2C Port
- OLED Driver IC: SSD1306 (I2C Address: 0x3C)
- More info: https://www.wemos.cc/en/latest/d1_mini_shield/oled_0_49.html
- Shipped with an I2C cable, please leave a message if you want one with loose ends.
- Genuine LOLIN by WeMos product
- Current version V3.0.0
- LOLIN I2C Interface
- Temperature: -20~60°C (±0.5°C)
- Humidity: 20-95%RH (±5%RH)
- Separable design
- D1 SCL
- D2 SDA
- Shipped with pins and an I2C cable
SHT30 I2C Shield
- Genuine LOLIN by WeMos product
- Current version 2.1.0
- LOLIN I2C Interface
- Two user selectable addresses
- Typical accuracy ±3%RH and ±0.3°C
- Separable design
- D1 SCL
- D2 SDA
- Shipped with pins and an I2C cable
SGP30 I2C Air Quality Sensor TVOC ECO2 Shield
- Genuine LOLIN by WeMos product
- Current version 1.0.0
- LOLIN I2C Interface
- Multi-pixel gas sensor for indoor air quality applications
- Outstanding long-term stability
- TVOC: 0-60000 ppb
- eCO2: 400-60000 ppm
- Separable design
- Φ2mm mounting holes
- D1 5 SCL
- D2 4 SDA
- Shipped with pins and an I2C cable
TFT Display
- Genuine LOLIN by WeMos product
- Current version V1.0.0
- LOLIN TFT interface
- 1.44” diagonal LCD TFT display
- 128×128 resolution, 18-bit (262,144) colour
- Driver IC: ST7735S
- 3 kinds of connection
- TFT_RST: RST*(D0/D3/D4))
- TFT_DC: D3*(D0/D4/D8)
- TFT_CS: D4*(D0/D3/D8)
- MOSI: D7
- SCK: D5
- TFT_LED: NC*(D0/D3/D4/D8)
- Shipped on its own with pins, or with a cable and adapter shield
Ambient Light I2C Shield
- Genuine LOLIN by WeMos product
- LOLIN I2C Interface
- Two user selectable addresses
- BH1750FVI illuminance to digital converter
- Wide range and high-resolution 1-65535 lx
- Separable design
- 2mm mounting holes
- Shipped with pins and an I2C cable
Barometric Pressure Shield
- Genuine LOLIN by WeMos product
- LOLIN I2C Interface
- I2C Interface
- Two user selectable addresses (0x77 or 0x76)
- Operation range: Pressure: 300 -1200 hPa. Temperature: -40 - 85 °C.
- Pressure sensor precision: ± 0.005 hPa (or ±0.05 m) (high precision mode).
- Relative accuracy: ± 0.06 hPa (or ±0.5 m)
- Absolute accuracy: ± 1 hPa (or ±8 m)
- Temperature accuracy: ± 0.5°C.
- Separable design
- 2mm mounting holes
- Shipped with pins and an I2C cable
IR Controller Shield
- Genuine LOLIN by WeMos product
- 4x IR LEDs emitter (940nm)
- 1x IR receiver (38kHz)
- Configurable IO (Default: Sender - D3/GPIO0, Receiver - D4/GPIO2)
- Shipped with pins
7 RGB LED Shield
- Genuine LOLIN by WeMos product
- 7 RGB LEDs (WS2812B-mini) each with 24-bit RGB colour
- 9 optional control pins (Default: D4/GPIO2)
- Shipped with pins
Relay Shield
- Genuine LOLIN by WeMos product
- Current version V2.0.0
- NO: 5A(250VAC/30VDC), 10A(125VAC), MAX:1250VA/150W
- NC: 3A(250VAC/30VDC), MAX:750VA/90W
- 7 configurable IO (Default: D1)
- Shipped with pins
OLED Shield
- Genuine LOLIN by WeMos product
- Current version V2.0.0
- Screen Size: 64×48 pixels (0.66” Across)
- Operating Voltage: 3.3V
- Driver IC: SSD1306
- Interface: IIC(I2C)
- IIC Address: 0x3C or 0x3D
- 2 customisable buttons
- Shipped with pins
Matrix LED Shield
- Genuine LOLIN by WeMos product
- Current version V1.0.0
- 8×8 dot matrix LED
- 8 step adjustable intensity
- D5 CLK
- D7 DIN
- Shipped with pins
Buzzer Shield
- Genuine LOLIN by WeMos product
- Current version V1.0.0
- Frequency: 1kHz-3kHz
- Shipped with pins
DHT22 shield
- Genuine LOLIN by WeMos product
- Shipped with pins
DHT11 shield
- Genuine LOLIN by WeMos product
- Shipped with pins
SHT 30
- Genuine LOLIN by WeMos product
- Shipped with pins
DHT12 (DHT V2)
- Genuine LOLIN by WeMos product
- Shipped with pins
Button shield
- Generic board not made by WeMos
- Shipped with pins
Proto board
- Generic board not made by WeMos
- Shipped with pins
Dual base
- Generic board not made by WeMos
- Shipped with pins
Triple Base
- Generic board not made by WeMos
- Shipped with pins
Micro SD card shield
- Generic board not made by WeMos
- Shipped with pins
Relay shield V2
- Generic board not made by WeMos
- Shipped with pins
RGB shield
- Generic board not made by WeMos
- Shipped with pins
Lithium battery shield
- Generic board not made by WeMos
- Shipped with pins
Motor shield
- Generic board not made by WeMos
- Shipped with pins
PCB Antenna
- Generic, not made by WeMos
- Shipped with connector
15cm Antenna
- Generic, not made by WeMos
- Shipped with connector
10cm Antenna
- Generic, not made by WeMos
- Shipped with connector
BMP180
- Generic board not made by WeMos
- Shipped with pins
DS18B20
- Generic board not made by WeMos
- Shipped with pins
Power
- Generic board not made by WeMos
- Shipped with pins
PCD8544 84x48 LCD Screen Nokia 5110
- Generic board not made by WeMos
- Shipped with pins
Real Time Clock
- Generic board not made by WeMos
- Shipped with pins and a battery
Data Logger RTC+SD
- Generic board not made by WeMos
- Shipped with pins and a battery