One sheet of electrically conductive film of ITO on PET.

Size 200mm X 100mm.

Additional sizes available.


ITO coated PET film is a vacuum-deposited Indium Tin Oxide (ITO) on optical grade polyethylene terephthalate film (PET). The conductive ITO layer is strongly adhered to the PET substrate and is thin enough to maintain high visible light transmission >80% for sheet resistance of 30 ohm/sq.


Product

ITPC30

PET film thickness

175um (7 mil.)

Transmittance

>80%

Sheet Resistance

30 ohm / square

Protective masks on both sides

Yes

Potential Applications
  • OLEDs
  • Flex. Solar cells
  • Sensors
  • Touch screen
  • EL devices
  • Smart windows
  • EMI shielding
  • Transparent heaters


ITO on PET conductive film is both flexible and transparent.


Sheet resistance of 30 ohm/square is good balance between conductivity and transparency.

  • Lower sheet resistance = higher conductivity

  • Please note: higher conductivity = thicker ITO layer = limited ability to bend without cracking the ITO layer and damage conductivity.

The film is protected on both sides with protective film that can be easily peeled off before use.

A multimeter may be used to confirm which is the conductive side.

 SILVER NANOFILM ON PET- 9 ohm/square      ***         PEDOT:PSS Conductive polymer    

                            

 

          PEDOT:PSS ink -Fully formulated             ****               Electroluminescent Powder + BaTiO3 

                 

MAX Phase Ti3AlC2 – Titanium Aluminum Carbide             ***       Antimony Tin Oxide (ATO) Conductive Powder

                    


Lanthanum Hexaboride LaB6                       ***             Titanium Carbide (TiC) Powder