AC Compressor 2 Ton 208-230v Fits Bristol H22J223ABC H22J223ABCA H21B223ABCA
 

This is a 2 Ton208/220 Volts 1-Phase Copeland Replacement Compressor. The CopelandModel # is CR22K6E-PFV-875. It is rated at 22,100 BTU. This Copelandcompressor is designed to replace the old obsolete compressor partnumbers listed in the title. Small piping changes may or may not be needed during installation.


TECHNICAL SPECIFICATIONS

Tonnage: 2
Volts 60 Hz 208/230-1.
Phase 1.
Refrigerant Type R-22.
Line Connection Suction ID (In) 3/4
Line Connection Discharge ID (In) 3/8
Base Mounting Centers (In) 7 1/2 x 7 1/2.
Application OEM A/C Equipments.
Includes Crankcase Heater.

TheRequired Run Capacitor is 30 uf 370 volt. Most condensing unitcapacitors are dual capacitors, meaning they operate the compressor andthe fan. To purchase the correct capacitor you will need to know the ufrating on the fan.

Start Capacitor rating, if needed, is 189-227 330 Volt

To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final! There are NO WARRANTIES! Compressors Should be installed by a qualified Heating Air Conditioning Tech.

Function:
 

Compressors compress refrigerants (freon) from a gas state into a liquid state and then pump it through the freon lines..

Replaces Old Part #s:


Repair Difficulty Level: difficulty graph

Partial List of Units that Use This Item:



Hit Ctrl + F and enter your model number for a quick search!

^~-->AC Compressor 2 Ton 208-230v Fits Bristol H22J223ABC H22J223ABCA H21B223ABCA
 

This is a 2 Ton208/220 Volts 1-Phase Copeland Replacement Compressor. The CopelandModel # is CR22K6E-PFV-875. It is rated at 22,100 BTU. This Copelandcompressor is designed to replace the old obsolete compressor partnumbers listed in the title. Small piping changes may or may not be needed during installation.


TECHNICAL SPECIFICATIONS

Tonnage: 2
Volts 60 Hz 208/230-1.
Phase 1.
Refrigerant Type R-22.
Line Connection Suction ID (In) 3/4
Line Connection Discharge ID (In) 3/8
Base Mounting Centers (In) 7 1/2 x 7 1/2.
Application OEM A/C Equipments.
Includes Crankcase Heater.

TheRequired Run Capacitor is 30 uf 370 volt. Most condensing unitcapacitors are dual capacitors, meaning they operate the compressor andthe fan. To purchase the correct capacitor you will need to know the ufrating on the fan.

Start Capacitor rating, if needed, is 189-227 330 Volt

To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final! There are NO WARRANTIES! Compressors Should be installed by a qualified Heating Air Conditioning Tech.

Function:
 

Compressors compress refrigerants (freon) from a gas state into a liquid state and then pump it through the freon lines..

Replaces Old Part #s:


Repair Difficulty Level: difficulty graph

Partial List of Units that Use This Item:



Hit Ctrl + F and enter your model number for a quick search!