Logo
SHOWER SEALS TO FIT 4-10mm GLASS 
SEAL GAPS UPTO 35mm


  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram
SEAL001 Main Image  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram
  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram
  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram
  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram
SEAL001 Main Image  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram
SEAL001 Main Image  SEAL001 Diagram SEAL002 Main Image SEAL002 Diagram

   
How to choose your seal


Step 1 Step 2 Step 3
If you are unsure which seal you need then please send us a piece of your old seal and we can try and match it up for you

 
  • Do not try to slide the seal along the glass or put lubricants on them. If you want to heat the seal to make it softer then do so with a hairdryer or warm water only. If your curve is is tight then you will need a pre curved seal which can be found below.

    CLICK HERE IF YOU WOULD LIKE A PRE-CURVED SEAL

    ALL DIMENSIONS ARE IN MM


  • Manufactured in the UK, the Shower Seal UK Ltd range of Push On Replacement Over Bath Screen Seals are without doubt the best on the market.

  • Our seals are made "oversized" at 0.9M (90cm) which means that they are longer than many existing shower door seals and can be easily cut to size with a hacksaw or secateurs.

  • We advise ordering a seal with a fin roughly 2-5mm bigger than the gap you need to seal. Ensure you check the gap size at each end as the size can vary. If the gap varies you will need to order a seal 2-5mm bigger than the maximum gap size you have.
  • Simply remove your old seal from the glass, clean the glass and push the new seal up on to the glass from below. Start from the hinge end and work your way along the seal pushing it up on to the glass as you go.

  • Do not try to slide the seal along the glass or put lubricants on them. If you want to heat the seal to make it softer then do so with a hairdryer or warm water only

  • We would advise all buyers to order a sample of the seal(s) they intend to buy before purchasing the full length product. This will give you the opportunity to test the product(s) for suitability and avoid any expensive return costs if the product is not suited for your application.
     
  • Delivery times given are estimates only. Please do not book in any tradesmen until you have received and checked your order.
  • If necessary the new seal can be cut to size with a hacksaw or secateurs and the soft fin cut with scissors
  • Strong, durable and easy to install.
  • No DIY knowledge necessary.
  • Available in any quantity for bulk orders.