Standard Tubular Latch
Standard Tubular Latch
Standard tubular latch with bolt through fixing holes available in 64mm, 76mm or 95mm lengths in Nickel Plated, Brass Plated and Epoxy Black finish. Please note that the 95mm Tubular latch does not come with holes for the bolt through fixings.
Manufacturer: eHardware
Brand: e-Hardware
Material:
Fixings Included: Yes
What's Included: Supplied complete with striker plate and screws.
Available Finishes: Available in 3 finishes
Finish:
Size / Dimensions
Size:
Max Door Thickness:
Backset: 44mm, 57mm, 77mm
Case Width: 13mm
Case Height: 19mm
Case Depth:
Case Length:
Forend Width: 25mm
Forend Height: 57mm
Striker Plate Height: 57mm
Striker Plate Width: 25mm (38mm including lip)
Bolt Width:
Follower Aperture: 8mm
What's Included: Yes
Additional Information
Locks & Latches
Normally a 2.5 inch / 64mm latch or lock or a 3 inch / 76mm latch or lock will be fine.
The length of the latch or lock determines the backset which is the distance from the edge of the door to the centre of the backplate on the door handle where the spindle passes through the door.
The backset on a 64mm latch or lock is approx 45mm and on a 76mm latch or lock is approx 57mm.






