888perfectauto

Coilovers For BMW 3 Series E36 316i 318 320 323 325 328 93-99

Description



All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

​​​​​​​

Toll IPEC Mine Zone Black List (The Parcel Cannot Reach)
6443 6215 6427 6230 6440 6225 6436 6646 6646
6233 6640 6612 6507 6642 6390 6435 6621 6415
6431 6438 6718 6999 6437 6426 6753 6639 6346
6537 6722 6754 6638 6714 6430 6751 6762 6555
6705 6330 6721            

 

Introduction
maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn out strut but improve handling at same time. It features with height adjustable and maintain the OE ride quality to the greatest extent.

 

 

Application

For BMW 3 (E36) 4-door sedan 316i; 318i; 318is; 320i; 323i; 325i; 325is; 328i; 318tds; 325td; 325tds; M3 (09/1990-12/1998)

For BMW 3 (E36) 2-door coupe 318is; 316i; 320i; 323i; 325i; 328i; 328is; M3  (09/1991-04/1999)

For BMW 3 Convertible (E36) 318i; 320i; 323i; 325i; 328i; M3 (03/1993-04/1999)

For BMW 3 Touring (E36) 5-door wagon 316i; 318i; 318tds; 320i; 323i; 325tds; 328i (08/1994-12/1999)


 
 

Specification

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models

Damping : Not adjustable

Top mounts: Front and rear OE top mounts required
Spring rate Front: 8 kg/mm (448 lbs/in)
Spring rate Rear: 10 kg/mm (560 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 42-62 mm
Spring length Front: 170 mm
Spring length Rear: 190 mm
Helper spring rate Front: 1 kg/mm (56 lbs/in)
Helper spring length Front: 102 mm
Spring Preload advised: 7-10 mm

 

 

Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners

 


Dimension
Package size : 70*50*20 cm
Weight: 23200 g

               


Features
1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

 

 

 
Notice
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.



Why Choose Us
  • Workshop display
  • Our team
  • Our history