Rain sensor for Arduino and embedded with detection plate and transducer

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


MECTRONIC
ELECTRONICS • HOME AUTOMATION • AUTOMATION • TECHNOLOGY

■ Product details

Consisting of a base with a large detection area (34x47 mm) on both faces and control electronics, this product is particularly suitable as a rain detector.   
Producer: Future Electronics
Code / Reference: RAINMOD
EAN:
Consisting of a base with a large detection area (34x47 mm) on both faces and control electronics, this product is particularly suitable as a rain detector. The electronic section has an analogue output, a digital one, a trimmer to adjust the input sensitivity and two status LEDs. The D0 digital output can directly drive devices with a maximum absorption of 100 mA such as relays, buzzers, small fans, etc. When the detection area is not wet by rain, the digital output D0 is at a high logic level, when it is wet it goes to a low logic level. By connecting the analog output A0 to the analog input of the Arduino it is possible to know the amount of rain that fell on the sensor. Power supply: 5 Vdc. Can be used with Arduino and embedded systems available on EBAY | MECTRONICA STORE SPECIFICATIONS 5V DC power supply Detects falling rain and the presence of conductive liquids Plate dimensions 34x47 mm Complete with transducer circuit Analogue and digital output with rain sensitivity level adjustment Digital output capable of driving loads up to 100mA

We prepare orders quickly and use selected national and international couriers, including Poste Italiane/SDA, BRT, DHL, UPS and DPD, based on the destination and planned service.

✓ Secure payments

Payments are handled directly via eBay, using the methods available on the platform at the time of purchase.

If you need the invoice, correctly enter the billing information requested when ordering.

✓ Return and guarantee

You have 30 days to request the return, according to the conditions indicated in the advertisement and the procedures established by eBay.

In the event of a defective product or problems with the order, use the tools made available by eBay: we will provide you with all the necessary assistance.

✓ Technical assistance

Do you need product information or assistance with your order? Use the eBay messaging. Our technical support is available both before and after your purchase.

Buy with peace of mind
✓ Accurate descriptions •  ✓ Tracked shipments •  ✓ Technical assistance •  ✓ Made simple
MECTRONIC
ELECTRONICS • HOME AUTOMATION • AUTOMATION • SOFTWARE DEVELOPMENT
Prestalia e-commerce solutions.
Consisting of a base with a large detection area (34x47 mm) on both faces and control electronics, this product is particularly suitable as a rain detector. The electronic section has an analogue output, a digital one, a trimmer to adjust the input sensitivity and two status LEDs. The D0 digital output can directly drive devices with a maximum absorption of 100 mA such as relays, buzzers, small fans, etc. When the detection area is not wet by rain, the digital output D0 is at a high logic level, when it is wet it goes to a low logic level. By connecting the analog output A0 to the analog input of the Arduino it is possible to know the amount of rain that fell on the sensor. Power supply: 5 Vdc. Can be used with Arduino and embedded systems available on EBAY | MECTRONICA STORE SPECIFICATION