PWM Power Control 9-28V DC 10A For Motors, Heaters And LEDs

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


✅ Product Details

This device allows you to control the power supplied to light bulb brightness (filament or halogen), resistance limited LED lights such as LED strips and low voltage spotlights, motor speed (drills, fans...etc), electric heaters via a knob potentiometer provided.

MANUAL | INSTALLATION WARNINGS This device allows you to control the power supplied to the brightness of light bulbs (filament or halogen), resistance-limited LED lights such as LED strips and low voltage spotlights, motor speed (drills, fans...etc), electric heaters via a knob potentiometer provided. The maximum load is 10A continuous on 9-28V DC with the device installed on a heatsink not supplied, otherwise without a heatsink it is possible to use the device with a maximum load of 5A. The device is ideal for resistive and inductive loads. Thanks to PWM modulation, the module allows complete control of power and is particularly suitable for electric motors thanks to the ability to use them even at the minimum number of revolutions. Furthermore, PWM modulation allows for very high efficiency as well as very low dissipation of the control module. The knob potentiometer supplied allows direct control via the knob of the power from <5% to >95%. The device, excluding the potentiometer, is installed in a plastic container with an aluminum rear part that can be installed on a heat sink or metal casing. The module can also be controlled, instead of the potentiometer, with an analog voltage from 0 to 5V supplied by external electronic circuits. SPECIFICATIONS: Input voltage: 9-28V DC Maximum current allowed and load: 10A (if installed on a suitable heat sink, not supplied) Without heat sink, maximum current 5A Power control provided via linear rotary knob potentiometer installed on wire connected to the device via faston. Possibility of external electronic controls with analogue voltage 0-5V DC Power control via PWM pulse modulation with frequency 10-20kHz For resistive ohmic and inductive direct current loads Connection: 2 faston connection to potentiometer (supplied), 2 faston connection in series to load for power control Ideal for light bulbs (filament or halogen), resistance-limited LED lights such as LED strips and low voltage spotlights, speed control of DC motors (drills, fans...etc), electric heaters. Dimensions approx. 87 x 60 x 33 mm WATCH THE VIDEO ON YOUTUBE! INSTALLATION WARNINGS Depending on the load of the module heats. The heat is dissipated by the aluminum plate at the bottom of the module. Under certain circumstances it must be mounted on a surface cooling according to the installation instructions. It is important that the module is fixed with 4 M3 screws (or 2.9mm metal screws) on the cooling surface. This may be the back wall of a metal enclosure. The aluminum plate on the bottom of the module must not bend, do not use larger screws and do not drill larger holes. The screw heads must rest on the module plate, rather than on the plastic edge of the module! During assembly, the module should not be curled up (if the ground is not flat). The reason: Inside the aluminum base of the module, thin insulating layers are directly soldered onto the SMD electronic components. Make sure that the maximum expected temperature (as specified in the module description) is not exceeded. If not, apply a larger cooling plate.


We ship all products within 24/48 hours with i best national couriers: Poste Italiane/SDA, BRT, DHL, UPS (national, European and international rapid), DHL, UPS And DPD (for international shipments).

Delivery assistance: leave us a telephone number to facilitate contact with the courier. Do you prefer a Post Office or a Post Office? Specify it in the address!

✅ Secure and flexible payments

Payments on eBay are managed securely by the platform: You can pay by credit card, debit card, Google Pay, Apple Pay and other supported methods. All in a quick and protected way.

Request the tax invoice when ordering: you will receive it at no additional cost.

✅ Easy return & Full guarantee

You have 30 days to think again: If you are not satisfied with the product, you can easily return it. And in case of defect, immediate replacement.

✅ Warranty: 2 years for private individuals, 1 year for companies. Original packaging and accessories required to activate it.

✅ Real and fast technical support

Do you need help before or after the purchase? Write to us WhatsApp al +39 051 6641440 to receive immediate assistance from a qualified technician. No call center, you speak directly to us.

Do you prefer? You can also contact us via telephone or email: we respond very quickly.

⭐ Satisfied or refunded

Your opinion is everything to us. If something is wrong, contact us before leaving feedback: we always solve. If you are satisfied, leave us 5 stars in every field to help us grow!


Mectronics - Technology, electronics and automation

ELECTRONICS • HOME AUTOMATION • AUTOMATION • SOFTWARE DEVELOPMENT

MANUAL | INSTALLATION WARNINGS This device allows you to control the power supplied to the brightness of light bulbs (filament or halogen), resistance-limited LED lights such as LED strips and low voltage spotlights, motor speed (drills, fans...etc), electric heaters via a knob potentiometer provided. The maximum load is 10A continuous on 9-28V DC with the device installed on a heatsink not supplied, otherwise without a heatsink it is possible to use the device with a maximum load of 5A. The device is ideal for resistive and inductive loads. Thanks to PWM modulation, the module allows complete control of power and is particularly suitable for electric motors thanks to the ability to use them even at the minimum number of revolutions. Furthermore, PWM modulation allows for very high efficie