Spring steel sheet metal strips 1.4310 flat bar 30x2mm-90x6mm cut strips

Warning: sharp edges! Sheet metal is cut on guillotine shears and edges are not deburred. Scratches on the surface cannot be ruled out. Item photos are theoretical, the real cuts delivered may look different. Sheet metal surface is without protective film, not polished or sanded, not mirror-bright.

Note: The flat bars are made from sheet metal or a panel cut.

Technical specifications:

Brand:	Evek
Manufacturer number:	Not applicable
Type:	Flat bar, flat stock
Material:	spring steel
Operation area:	Manufacture of corrosion-resistant springs and high-strength components; automotive industry; Mechanical engineering; electronic devices; chemical industry; Food industry;
Characteristics:	good formability and weldability; good corrosion resistance; good polishability and cold working; medium machinability; Magnetizability dependent on cold forming;
Norm classifications:
Material number:	1.4310
AISI:	302
EN:	X10CrNi18-8;
Additional Information:
Density:	7.9g/cc
melting point:	1420ºC
Tensile strenght:	1300 - 1500 N/mm²
electr. Resistance:	0.70Ωmm²/m
electr. Conductivity:	1.5MS/m
Surface:	smooth (may contain handling or storage marks)

Description:

Important: Cut on guillotine shears. Cutting tolerance +/- 2mm.

Not suitable for decorative or visual use. Surface pure industrial quality - scratches not excluded. Not all sheets in protective film. Please ask separately in advance if surface quality is relevant to you - we will try to find a solution.

The spring flat bar 1.4310 is made of austenitic chrome-nickel steel. The chromium content of spring steel 1.4310 is at least 16% and the nickel content - at least 6%. The material is characterized by good formability, weldability and corrosion resistance. It has good mechanical properties such as good polishability, cold forming and medium machinability. The magnetizability of 1.4310 changes due to cold forming.

The spring steel 1.4310 is ideal for the production of corrosion-resistant springs and high-strength components and achieves the highest possible tensile strength values. In addition, the material 1.4310 is widely used in the automotive industry and in mechanical engineering. Other areas of application for X10CrNi18-8 are:

• electronic devices;
• chemical industry;
• Food industry.

The spring flat bar 1.4310 is characterized by the following features:

• good formability and weldability;
• good corrosion resistance;
• good polishability and cold working;
• medium machinability;
• Magnetizability dependent on cold forming.