Titanium zinc sheet 0.55mm-1mm titanium zinc plates zinc sheets 100 mm to 1000 mm
Dimensional tolerances: thickness ± 0.025 mm, width ± 2 mm, length ± 2 mm
- TOP quality at fair prices
- High-quality products made to measure and cut to size
- Competent advice & service
Technical data:
| Brand: | Evek |
| Manufacturer number: | Not applicable |
| Type: | sheet |
| Material: | Titanium zinc |
| Operation area: | Roof covering; roof drainage (gutters, downpipes); facade cladding |
| Norm classifications: | |
| Quality standard: | din EN988 |
| Purity Zn: | din EN1179 |
| Additional Information: | |
| Density: | 7.2g/cm³ |
| Melting point: | 418°C |
| Tensile strenght: | min. 150N/mm² |
| Yield limit: | min. 110N/mm² |
| Expansion coefficient: | 0.022 mm/(mK) |
| Elongation at break: | min 40% |
| Thermal conductivity: | 97 W/(m⋅K) |
| Surface: | rolled |
Description:
Titanium zinc is an alloy of zinc and small additions of titanium and copper. The mass fraction of zinc is approx. 99.995%, copper - about 0.08-0.17% and titanium - about 0.07-0.12%. In contrast to pure zinc, the material has increased tensile strength and fatigue strength. The titanium zinc sheet has very good processing properties and is corrosion-resistant. It is also environmentally friendly, fully recyclable and has a long service life. The titanium zinc sheet is produced according to din EN 988.
Titanium zinc sheet is widely used in construction. The main uses of titanium zinc are:
- roof covering;
- Roof drainage (gutters, downpipes);
- Facade cladding.
Titanium zinc sheet is characterized by the following features:
- excellent corrosion resistance;
- very good processing properties;
- environmental compatibility;
- recyclability;
- long lifetime.
