One stop shop for all your RC Needs!
100% Satisfaction Guaranteed
mobile_logo
Next day Delivery
Available
Same Day Dispatch
If Ordered by 3pm
Easy Returns
service
Excellent
After Sales Service
Top Rated
Ebay Seller
5 x BSI Bob Smith Super Thin Gap Fill MAXI Cure Gold Foam CA 1/2oz BSI101 BSI117
I Item Description

1/2 oz - 5 PACK

1 x BSI 101 - Bob Smith Industries Insta-Cure Super Thin Glue CA (1/2oz)

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapour that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Works Best On: Balsa Wood and Ceramics.

Works Good On: Soft Wood, Fiberglass, Hard Plastics, Water-Resistant and CA Hinges.

1 x BSI 106 - Bob Smith Industries Insta-Cure+ Gap Filling Super Glue CA (1/2oz)

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Works Best On: Balsa Wood and Soft Wood.

Works Good On: Hard Wood, Glass & Metal, Fiberglass, Ceramics, Hard Plastics, Rubber, Laminating, Water-Resistant and Reinforcing.

1 x BSI 111 - Bob Smith Industries MAXI-CURE Extra Thick CA Glue (1/2oz)

Bob Smith Industries MAXI-CURE™ extra thick CA glue. MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.

MAXI-CURE™ bonds fibreglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside of a cloth textured surface of fibreglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.

1 x BSI 117 - Bob Smith Industries IC-2000 Black Rubber Toughened CA Glue (1/2oz)

This is a one ounce bottle of Bob Smith Industries with a formula that toughens the Cyanoacrylate with the addition of rubber IC-2000 creates bonds on non-porous surfaces that are highly resistant to shock and vibration. This flexible bonding capability can also be used to great effect when working with metals, fibreglass, rubber and carbon fibre. Curing time is 20 to 40 seconds, which can be accelerated with the addition of Insta-Set. When cured IC-2000 remains pliable enough to be carved with a hobby knife. Its flexibility and high bond strength makes it ideal for gluing rubber tyres onto wheels.

1 x BSI 121 - Bob Smith Industries Super-Gold Foam Safe 1/2oz Thin CA Glue

Bob Smith Industries CA is completely odourless during curing, so no irritation to nose or eyes, are non-blooming and only take a few seconds longer to bond than the standard versions. They are not as strong as regular CA and are much more expensive to produce but in situations when a lot of gluing is being done such as the saturation of fibreglass cloth when laminating they provide an escape from exposure to the irritating and unpleasant fumes of the evaporating monomer.

In addition Super-Gold’s don’t attack white foam so they can be used in the construction of foam core wings and the repair of any of the many foam based ARF’s that are available nowadays. The non-blooming property also makes them the best choice for plastic kit construction with clear parts like canopies, although Super-Gold is still the best choice for assembly of the rest of the kit.

For the most part the fumes that CA’s emit during the curing process although unpleasant don’t actually do any harm. If however sensitivity is an issue, or perhaps the working area where the CA is being used is unable to receive adequate ventilation, odourless CA’s in the form of Super-Gold™ and Super-Gold+ do provide a solution.




Next day Delivery
Available
Same Day Dispatch
If Ordered by 3pm
Easy Returns
service
Excellent
After Sales Service
Top Rated
Ebay Seller

How it all began!

Wireless Madness was born out of love for RC Cars and RC Helicopters. Being long standing enthusiasts and experts in this field we bring together our know-how and experience into the hobby and toys world. Wireless Madness aims to be the UK's elite online store providing a vast range of models. Whether you're in the market for Radio Controlled Cars, RC Electric Cars, RC Nitro Cars, RC Petrol Cars, RC Planes, RC Helicopters, RC Boats, RC Bikes, RC Tanks and RC Accessories you can always find the biggest and most renown names around and in particular; HPI, Kyosho, Vaterra, Team Orion, Traxxas, Team Losi, Anderson Racing, Team Associated, HobbyZone,E-Flite, FTX as well as Carrera, Blade and Syma. Not only this, our store aims to provide 1000's of parts and spares available on the market today from all major leading brands including Spektrum, Graupner, Power HD, HiTec, Overlander to name a few.

We don't stop just there, as our name suggest we love wireless technology, you can shop online or in store for slot car sets, novelty ready to run kits and even rocket launch sets. In keeping with the gadget craze we keep upto date with latest toys on the market and with our in house research team strive to be as competitive as possible. If you still don't find what you are looking for; ring our UK based office for help, advice and customer service second to none - we will do all we can to source anything radio controlled related.

Credit or Debit card payments

We accept payments through most major Credit / Debit cards via our secure online ordering system using Sage Pay. Or you can pay over the telephone by calling 01772 200 888. Please note we will only post out to the card holders registered address. If you require help or assistance with your order please call our customer service helpline on the number above.

Paypal

We accept PayPal payments. We can only post out to the card holders verified address.

Any small, low cost items will be sent to you via Royal Mail postal service (2nd, 1st or Special Delivery - where applicable). Larger more valuable items will be delivered by our couriers using 2-3 working day or next day express service where available.

We aim to deliver within 3 working days (depending on delivery service available), but sometimes due to high order volumes and demands please allow 5 days before contacting us. Where possible we will attempt to contact you via telephone/email if we become aware of an unexpected delay.

All small orders are sent out via Royal Mail - upto a certain value, above this the order would be sent using Royal Mail Recorded signed for service. If your order value is over £25.00 it will be sent out via our courier service requiring a signature upon delivery. If you miss a delivery a card will be left to advise you to pick up your goods from the local sorting office.

Please remember when you accept a delivery from the courier; you are signing to say that you have received the goods in perfect condition.If you notice any damage on the package or if you think it has been mishandled always sign as "damaged" alternatively if there is a possibility of the product being damaged please refuse delivery.

30 Day Returns

Wireless Madness not only takes pride in its products but also sees that it is paramount all of its customers receive the best possible shopping experience. For complete peace of mind we like to offer a straightforward service on returns - that's a 30 day returns policy on whether you have ordered the wrong item, no longer require the item or simply - you have changed your mind and want your money back! Simply put we will process a refund or a replacement if you wish.

We will happily accept returns as long as the following requirements have been met:

  • All item(s) to be returned in complete unopened original packaging- undamaged
  • All item(s) to be unused, not installed or operated
  • A receipt or proof of purchase must be included along with a note explaining why you are returning the item(s)
  • All Item(s) to be returned within a 30 day period

Please note under these circumstances we cannot refund any postage charges incurred when returning item(s) to us. If we are unsatisfied with the condition of the item(s) being returned or if we are unable to sell in its present condition we may charge a relevant fee.

Customers will be charged a restocking fee if we find the item(s) has been opened. We cannot process any refunds or accept any item(s) for returns from customers if they have been used or operated - the only exception being if an item has produced a fault.

Return of Faulty Items and Goods

In the case where you are directed to return faulty goods back to us, please ensure the item is complete (where applicable) and returned to us securely to prevent further damage in transit along with a proof of purchase receipt. 

Damaged or Incorrect Goods Sent

Upon fulfilling each order we ensure all item(s) are reasonably packed and are secure for transport. All item(s) leaving our premises have undergone thorough checks from their respective manufacturers and are sold on the basis of them being fully operational and non-faulty. If you have discovered a fault and believe it is a manufacturers defect then please inform us straight away and refrain from using the product altogether. On very rare occasions item(s) can also be damaged in transit and although this is something out of our control we will arrange for a either a replacement, repair or a refund - once the item and package has been inspected by us.

IMPORTANT : Please check the item(s) for any damage before signing as you are signing to receive the item(s) in perfect condition. If you find the item(s) to be damaged please refuse to accept the item(s). Wireless Madness cannot be held responsible for any damage discovered after the item has been signed for. Please make sure you are available for delivery as this condition applies to any signature received by the delivery service. Once we receive the item(s) back we will contact you directly and process your order for either a replacement or refund.

Incorrectly sent item(s) or item(s) with a manufacturing fault we aim to replace as soon as possible.

In either case please contact us as soon as possible to allow us to process your order quickly and efficiently.

Returns Address:

(QUOTE EBAY ID AND ORDER ID)
Wireless Madness
Unit 3 Eastham Street, Springfield Ind Est.
Preston, Lancashire, PR1 7JD

Wireless Madness

Unit 3 Eastham St, Springfield Ind Est.
Preston
Lancashire
PR1 7JD
UK

Opening Times:

Mon-Fri : 10.00am till 2.00pm
Sat / Sun & Bank Holidays: Closed

I Featured Categories