Get the best RGB video quality from your NTSC Super Nintendo or Super Famicom with the Arcade Express Pro RGB SCART cable, built with CSYNC, stereo audio, double shielding and an integrated PCB.

What You Get

• 1 x Arcade Express Pro RGB SCART cable for NTSC Super Nintendo / Super Famicom.
• 12-pin Nintendo AV Multi Out connector for the console side.
• EuroSCART connector with integrated printed circuit board.
• True RGB video signal with CSYNC.
• Stereo audio through the SCART cable.

Compatibility

• Compatible exclusively with NTSC Super Nintendo consoles.
• Compatible exclusively with NTSC Super Famicom consoles.
• Suitable for North American and Asian NTSC systems.
• Compatible with SCART-enabled televisions.
• Compatible with CRT TVs with RGB SCART input.
• Compatible with SCART to HDMI converters that support RGB.
• Compatible with SCART to component video converters.
• Compatible with OSSC, RetroTink 2X SCART, RetroTink 5X, RetroTink 4K and similar RGB-compatible upscalers.
• Compatible with XRGB-mini Framemeister when used with a EuroSCART to mini adapter.
• Not compatible with PAL Super Nintendo consoles.
• Not compatible with PAL Super Famicom consoles.
• Not compatible with PAL GameCube consoles.

Key Features

• Designed and manufactured by Arcade Express.
• True RGB video output for a sharp, vivid and clean image.
• CSYNC composite sync from pin 3 of the Nintendo AV Multi Out connector.
• 470 ohm resistor on the sync line for correct attenuation.
• High-quality coupling capacitors on the RGB lines for a correct signal.
• Stereo audio.
• Double-shielded cable to reduce crosstalk and external interference.
• EuroSCART connector with integrated PCB.
• Fully wired and grounded SCART connector through the PCB.
• 12-pin Nintendo AV Multi Out connector.
• No tuning required: plug and play.
• Ideal for CRT TVs, RGB SCART setups and modern RGB-compatible upscalers.
• Excellent choice for NTSC Super Nintendo and Super Famicom collectors.

Technical Specifications

• Console connector: 12-pin Nintendo AV Multi Out.
• TV / scaler connector: EuroSCART with integrated printed circuit board.
• Video signal: RGB.
• Sync: CSYNC.
• Audio type: stereo.
• Shielding: double shielding.
• Compatibility: NTSC version only.
• Cable length: approximately 170cm.
• Approximate weight: 143g.

Important Region Warning

• This cable is exclusively for NTSC Super Nintendo and NTSC Super Famicom consoles.
• NTSC consoles include models sold in North America and Asia.
• Do not use this cable on a PAL Super Nintendo.
• Do not use this cable on a PAL Super Famicom.
• Do not use this cable on a PAL GameCube.
• PAL consoles output 12 volts on pin 3 of the AV Multi Out connector instead of CSYNC.
• Using the wrong regional cable can damage your television or video equipment.
• A dedicated PAL Super Nintendo cable is required for PAL consoles.

Why Choose This Cable?

• RGB SCART gives a much sharper and cleaner image than the original composite video cable.
• CSYNC is ideal for high-quality RGB setups, professional monitors and modern upscalers.
• The 470 ohm resistor provides correct sync attenuation for safe and stable operation.
• Double shielding helps reduce interference for a cleaner image and sound signal.
• Built for CRT televisions, OSSC, RetroTink, Framemeister and other RGB-compatible devices.
• A high-quality alternative to generic SCART cables with poor shielding or incorrect wiring.

Please check your console region before ordering. This cable is for NTSC Super Nintendo and NTSC Super Famicom consoles only.

This cable uses CSYNC from pin 3 and must not be used with PAL Super Nintendo, PAL Super Famicom or PAL GameCube consoles.