This is an all-in-one lab tool made by NI that combines the most commonly used lab set up in one box all run on a computer, so it also naturally serves as a data acquisition box. It does everything a NI DAQ does and more.
- 100Mhz 1GS/s oscilloscope 2 channels
- Arbitrary waveform/signal/function generator up to 20Mhz, 125 MS/s, 14-bit
- 34 channels logic analyzer 100Mhz
- 3 power supply channels: up to 6V@1A, +25V@500mA, -25V@500mA
- 8 channel digital I/O
- 5.5 digits multimeter with 5S/s
With USB or Wifi connectivity. All tested.
COMES WITH A FULL SET (BOX) OF ORIGINAL ACCESSORIES
The last picture showing a unit in action is just a snapshot of how I ran the tests in a batch of 6 units including this one, so it might not be the unit you'll receive in that picture (trust the other pictures).
Here're the tests that I did. The ranges account for calibration drift over the years. You can send the unit to NI for calibration if you need to readjust the unit for tighter tolerances.
S/N | Nominal | Ranges | Low | Upper | 308116A |
FW | | | | | 18 |
Test Temp (deg C) | | | | | 38.1 |
Cal Temp (deg C) | | | | | 37.5 |
Ch1 - Sine 30Mhz, Vpp | 1 | | | | 0.952 |
Ch1 - Zero DC | 0 | 0.05 | -0.008 | 0.008 | 0.0002 |
Ch2 - Sine 30Mhz, Vpp | 1 | | | | 0.954 |
Ch2 - Zero DC | 0 | 0.05 | -0.008 | 0.008 | -0.0004 |
Ch1 - Ext Trigger | | | Functional | Correct |
Ch2 - Ext Trigger | | | Correct |
Fgen - DC | 0.1 | | Specs didn't say | 0.1112 |
| | 0 | | -0.12 | 0.12 | 0.0111 |
Fgen - Square wave at 5kHz, 1Vpp (Read half) | 0.5 | | Specs didn't say | 0.5 |
Power Supply | 6 | | 5.91256 | 6.08857 | 6.0016 |
| | 25 | | 24.54369 | 25.46372 | 25.094 |
| | -25 | | -25.46372 | -24.54369 | -25.094 |
| | | | | | |
DMM/Vdc (100mV range) | 0.101 | | 0.10084 | 0.10116 | 0.101 |
| | 0 | | -0.00004 | 0.00004 | 0 |
| | -0.101 | | -0.10116 | -0.10084 | -0.10099 |
DMM/Vdc (10V range) | 10.1 | | 10.08401 | 10.11601 | 10.0988 |
| | 0 | | -0.004 | 0.004 | 0 |
| | -10.1 | | -10.11601 | -10.08401 | -10.0988 |
No AC current calibrator | | | | | |
DMM/mAdc | 0.0101 | | 0.01003 | 0.01017 | 0.0101 |
| | 0 | | -0.00002 | 0.00002 | 0 |
| | -0.0101 | | -0.01017 | -0.01003 | -0.0101 |
DMM/Adc | 0.1 | | Smaller than table range | 0.10005 |
DMM/Ohm | 1000 | | 1000.4 | 1000.7 |
| | 0 | | Shorting bar | 0.21 |
DMM/Cont (Short test) | | | | | Works |
| | | | | | |
DIO-In | 1 to 8 | | | | Works |
DIO-Out | 1 to 8 | | | | Works |
MSO | 32 channels | | | | Works |
| | | | | | |
WiFi | Client | | | | Works |
| | | | | | |
| | | | | Summary | Good |
1 year exchange/repair warranty (domestic shipping covered).
Save a copy of the listing and invoice for post-sale service by Humgar LLC.
Having the unit work for you is more important the price paid.
I'll do everything within my abilities (as an electronics hobbyist) to make sure your intended usage is well taken care of.
Contact me (email on your paypal invoice) first above anything else and I'll make sure you'll be happy with the outcome.
--------------------------------------------------------------------------------------
Corporate / Institutional customers: I can give you 2~4 weeks right-of-inspection (ship before you pay) for under certain conditions.
Introduce yourself (name, position, business) but do NOT give me your phone or email.
--------------------------------------------------------------------------------------
I'd be happy to use your Fedex account (just select "local pickup" and shoot me a message).
Outside 48 contiguous states: Contact me with your location for a shipping quote (or use your shipping a/c).
International buyers NOT using Global Shipping Program (GSP): the $400 is just a placeholder
Lock-in the purchase with "buy-it-now" first, but don't pay yet: I'll send you an invoice with the correct shipping cost.