DBD750-DS2 Electric Hydraulic Pump
| Rated working pressure |
High pressure 70Mpa |
Low pressure 7Mpa |
| Flow |
Hypertension 1L/min |
Low-5L/min |
| Motor power | 900W | |
| Voltage | 110V | |
| Frequency | 60Hz | |
| oil storage volume of | 7L | |
| outside dimensions | 11.8"X9.4"X15.7" | |
Specification
Should be used first quick connector quick connector sets equipped with hydraulic equipment connected. When plugged in, press the power switch to operate for some time, in the absence of pressure, the output hydraulic oil all the work, and the output hydraulic oil with increasing load all the work up to 70Mpa, the need to buck their own supercharged, press the solenoid valve switch the pressure back to zero and hydraulic equipment, hydraulic oil back to the fuel tank. Remove the quick connector sets the end, unplug the power.
Note!!!! Did not maintain the pressure function
Product details
Structure and working principle
Pump principle: (see oil system diagram)
(Set oil block) devices in the high pressure the output oil line where unloading relief valve to maintain the required output pressure and the security role.
(Set oil block) devices in the high pressure the output oil line where unloading relief valve to maintain the required output pressure and the security role.
The pump can be observed at any time to work when the pressure changes, ad hoc pressure gauge, so that users always observe the changes in the work. Control switches according to user needs, with manual switch.
Item Number 230542
On Jul 19, 2026 at 19:36:37 PDT, seller added the following information: