Brand New set of 4 Thule Tracrac 3/8-16 x 1-1/4” stainless steel T bolts. These T bolts are the standard size used on Tracrac gen 1 and 2 racks. These T bolts have an elongated head to keep them from spinning in the 9/16” gen 1/2 Tracrac slot. Besides being used to assemble the saddles and braces to a gen 1/2 rack, and cantilever, they are used to attach the plastic tie downs on a gen 2 TracOne. They are also commonly used to mount accessories like lights, bike racks, conduit carriers, fishing rod holders, etc. using the gen 1/2 slot.

Please note that Thule switched to a steel 20mm T bolt on the top of the crossmember on the gen3 racks and these 3/8-16 x 1-1/8” stainless steel T bolts are not compatible with the top 20mm slot on the gen3 racks

These 3/8-16 x 1 1/8” stainless steel T bolts are also used on the current gen 1/2 load stops, but not on the gen3 load stops that use the 20mm steel T bolt. If you do use these to replace a missing gen1/2 load stop T bolt, keep in mind that Tracrac used a couple of different lengths on the older racks, and had different gen 1 load stop knob suppliers with different length recesses. So, this T bolt should work, but may be a slightly different length than your old gen1 T bolt

These T bolts are used in the gen1 and 3 feet of the TracVan 2 crossmember racks. On a 3 crossmember TracVan rack, these are used on the middle crossmember, but the front and rear crossmembers have 1/2” shims that require a longer 1-3/4” T bolt. If you need those, please let me know.

This listing is just the 4 stainless steel T bolts. I have a separate listing if you are mounting something and need the T bolts as well as 4 3/8 stainless steel washers and 3/8-16 stainless nylock nuts