| PRODUCT TYPE | Industrial grade isolated USB to RS485 converter | |
|---|---|---|
| Baud rate | FT232RNL chip | 300bps ~ 512000bps |
| Host port | USB | |
| Device port | RS485 | |
| USB | Operating voltage | 5V |
| Connector | USB-A | |
| Protection | 200mA resettable fuses, ESD protection | |
| Transmission distance | Approx. 5m | |
| RS485 | Connector | Screw terminal |
| Pins | A+, B-, GND | |
| Direction control | Hardware automatic control | |
| Protection | 600W Lightningproof, anti-surge, and 15KV ESD protection (onboard 120R balancing resistor) | |
| Isolation voltage | Up to 2.5KV opto-isolation | |
| Transmission distance | Approx. 1.2km (low rate) | |
| Transmission mode | Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) | |
| LED indicators | PWR | Red power indicator, lights up when there is USB connection and voltage is detected |
| TXD | Red TX indicator, lights up when the USB port sends data | |
| RXD | Red RX indicator, lights up when the device port sends data back | |
| Operating environment | Temperature | -40℃ ~ 85℃ |
| Humidity | 5%RH ~ 95%RH | |
| Operating system | Mac, Linux, Android, WinCE, Windows 11 / 10 / 8.1 / 8 / 7 / XP | |
Onboard original FT232RNL chip, providing better stability and compatibility,
built-in Lightningproof tube, resettable fuses, ESD and TVS protection circuits, etc.

The USB signal can be converted into a balanced differential RS485 signal and the transmission rate is stable. The reliable speed is 300bps ~ 512000bps, the transmission distance is about 1.2km for RS485, and about 5 meters for USB

Onboard 3 LEDs for indicating power and transceiver status


Weight: 0.069 kg