About the stand
How thin will the laptop stand fold? How stable and comfortable to use? How light?
The new structure of Portable Tablet/iPad Stand (registered model) provides stability, compactness, speed of assembly and light weight.
The stand consists of one indivisible part.
A dual-purpose rubber band with threaded ends is used to fix the tilt stop
and also tighten the stand in the folded position.
The Tablet/iPad Stand, in addition to the horizontal surface, provides 3 tilt angles of: 25, 45 and 65 degrees.
To attach the tablet/iPad to the stand, 4 pairs of round scotch fasteners are included.
This model offer the user incredible weight and compactness, 2-3 times less than alternative solutions! In addition, there is a shelf for an iPhone or accessories and a shoulder strap.
The stand is manufactured using a milling method with extensive use of built-in hinges, which, thanks to the material (PP), can easily withstand thousands of folds.
Warning/Limitation: Use at temperatures below -10°C (14°F) may cause failure of the flexible axles.
Weight 1.87 lb (850 gram). Able to hold about 44 lb (20 kg). Suitable for any iPad/tablet up to 16 inches.
This model was developed taking into account the wishes of sports photographers.
To see all versions and more information, please visit the website: www safrut co il
Attention: There is imitation in China.
The Mini-Max (Minimum-Maximum) stool folds into a plate 9"(23cm) in diameter; it is adjustable (12 positions in 1.2" increments) to the heights of 2.4"(6cm) to 16"(41cm) and can be hung on the shoulder using a strap made of wear-resistant leatherette.
Extension spring keeps the stability of locking in the open position and couple of magnets in the closed.
This model tested with 200 kg (440 lbs) placed on it.
The Mini-Max portable telescopic stool is the brainchild (registered) of Safrut.
The Mini-Max was born in November 2009 in Israel, when its inventor, the owner of Safrut, woke up in the middle of the night shouting: "Eureka!"
Since that moment an intensive development process began, during which a number of prototypes were developed until the perfect model was created.
The new stool is made from high quality polyamide - a material known for its resistance and durability, a material that can resist all kinds of weather conditions and is also considered to be an environmentally friendly material.
The telescopic body of the stool is made from 120 segments that form together a strong and flexible basis while the optimal balance between weight, dimensions and strength is maintained.
Heights: 2.4"(6cm) - 16"(41cm) >> 12 positions
Seat dimensions: 9"(23cm) diameter
Maximum load: 260 lbs (120kg)
Weights: 2.42 lbs (1.1kg)
Strap length: 43"(110cm)
Instructions for use
If you want the chair to serve you for many years, be sure to read the instructions and strictly follow it. Service overseas is not available (requests for replacement or spare parts will not be accepted).
For better stability in the partial opening position, it is recommended when open the stool to hold it upside down, so that eventually the seat rests on the widest ring.
Warning: To avoid damage, do not sit sideways or tilt the seat relative to the telescopic body (always maintain full contact between the rings).
The combination of tilt and turn causes to breakage of the upper rings.
Note: When the stool is used in sandy terrain the penetration of dirt in slots should be prevented. In the latter case it is possible, and even advisable, to wash it.
After prolonged disuse or if smoother opening and closing is required, it is recommended to lightly spray dry (oil-free) silicone spray outside the telescopic body.
Important: The buyer is responsible for any import duties.
Note: For order from ISRAEL please contact the supplier by phone. Purchase through ebay is intended only for foreign buyers.
Thanks for looking