Aluminum Dent Pulling Machine Car Auto Repair Machine 110V

The welding repair machine can weld M3-M6 studs of various materials. It has many advantages of simple operation, short welding time, little heat impact on the base material, no damage to the base material surface, good welding quality, firmness, beautiful appearance and energy saving. lt is the most ideal device for maintenance of aluminum car bodies.

Parameters

Input Voltage

110V

Power

3KW

Screw Size

M3/4/5/6

Welding Thickness

0.4-1.2mm

Instantaneous Maximum Current

11000A

Current

77 Gears Operation

Mode

Intelligent Induction Input

Packing dimension

19.3*13.8*18.5 inches (49*35*47cm)

Net weight / Gross weight

37.9LBs (17.2kg) / 43.6LBs (19.8kg)

Precaution

1. Ensure that the machine is connected to the grounding wire and the grounding power cord in good condition (any screw on the machine shell can be grounded).

2. Ensure that the workbench is connected to the grounding device (any screw on the machine shell can be grounded).

3. It is necessary to prevent the operator from touching the metal parts to be welded without protection or wearing wet clothes.

4. Avoid touching the place to be welded.

5. Do not conduct spot welding in a very humid place or on a wet floor.

6. Do not use frayed and cut cables for welding. Check whether the cable has insulation defects, exposed copper wires, loose connections, leakage and other unsafe factors.

7. Before replacing the electric wire, please turn off the machine.

8. Before all inspection and maintenance, turn off the machine and cut off the power plug directly.

Features

1. Adjustable pressure welding gun: The welding force required by different studs is different, so the welding gun must be adjustable in pressure.

2. Puller frame: Made of aluminum materials, more durable.

3. Current knob adjustment: Knob adjustment is faster and more convenient than button adjustment.

4. All copper transformer: High power, high working efficiency and long service life.

5. 50m² oxygen-free copper cable: The discharge current is faster than double bonding.

7. Intelligent matching welding mode: fast arcing, deep melting pool, solid welding.

8. Large-capacity capacitor: High quality, large current.

Main Unit

The main unit is of a compact structure, integrates the power regulation knob, digital voltage displayer, state indicators and quick connectors, ensuring the power can adapt to different welding requirements, and improving the welding quality and repair effect.
　

Welding Gun

The welding gun meets the ergonomic standard, and adopts the instantaneous high-energy and short-time welding mode, effectively improving the welding spot bonding strength, reducing the thermal damage and keeping the welding process stable and quick.
　

Quick Puller

The quick puller is firm and durable in structure, can meet the high-frequency and high-strength repair operating requirements and is not prone to deformation and breakage. It adopts the double-support structure, ensuring the pulling force is stable and uniform.
　

Bond Strap

The high-quality bond strap has excellent conductivity, is resistant to high temperature and wear, and is not prone to slipping in different working conditions, ensuring the bonding circuit is kept stable during welding, and achieving the safety protection effect.
　

Operation Method

1. Select the appropriate welding tip according to the size of the stud, adjust the positioning screw in the welding tip, then insert it into the gun head of the welding torch, and tighten it carefully with a wrench. Then insert the stud, and observe and ensure the stud should be 5-8mm higher than the three support rods of the welding torch. Then connect the 110V power supply, and ensure reliable grounding of the welding machine. Turn on the power switch, the digital meter displays the welding voltage, adjust the "power adjustment" knob to the appropriate power according to the size of the stud used. The specifications and voltage matching can be adjusted as follows:

2. Remove oil and rust on the workpiece to avoid spark splashing or weak welding due to poor contact.

3. The stud is installed in the gun mouth. Make the welding gun perpendicular to the base material and exert a slight pressure.

4. Press the micro switch on the handle of the torch, and the welding will be completed after a "pop".

5. Adjust different voltages and observe the welding effect, check the firmness of the welding and ensure the welding place is well connected and flat.

6. Adjust the voltage according to the above experiment results and then conduct welding.

7. The larger the output voltage, the larger the diameter of the welded stud.

8. As for the repair of sheet metal, after welding, screw the pulling ring on the stud, and use a pulling tool with a thermal spray gun to heat the damaged part and flatten the sheet metal.

Item Included:033381

 1 x Car Auto Repair Machine 110V

Shipping & Handling Details

Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

Defective & Damaged Products 

▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. 
▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Warranty & Feedback

▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller. 
▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much.