We accept all kinds of ebay payment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|


Compatible Vehicles:
For Dodge D150 1990-1993
For Dodge Ramcharger 1979-1983
For Dodge Ram 1500 1994-2001
For Ford Bronco 1966-1996
For Ford E-150 2003-2006
For Ford E-150 Club Wagon 2003-2005
For Ford E-150 Econoline 1992-2002
For Ford E-150 Econoline Club Wagon 1992-2002
For Ford F-150 1975-1996
Note: These adapters are used to change bolt pattern, 5x5.5 Hub to 5x5 Wheel
--If you dont't know the specific of your vehicle, pls confrim by following the below steps:
1) Check Vehicle Bolt Pattern/ PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
2) Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3) Check Vehicle Thread Pitch
There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
--Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
--Step for Installation Wheel Spacers

| Item Specifics | |
|---|---|
| Brand | EWAY-motor |
| Manufacturer Part Number | E842260WAY |
| Spacer Thickness | 1.5" or 38mm |
| Vehicle Bolt Pattern | 5x5.5 or 5x139.7 |
| Wheel Bolt Pattern | 5x5 or 5x127 |
| Lug Patterns | 5 Lugs |
| Bolt Pattern | 5 on 5 1/2 Hub to 5 on 5 Wheel; 5x139.7 Hub to 5x127 Wheel |
| Hubcentirc | No |
| Hub/ Center Bore | 87.1mm |
| Studs/ Nuts Size | 1/2"-20 |
| Bolt Shank Length | 32mm |
| Torqued Down By Hand At | 75-85 FT/LBS |
| Material | High Quality t6 6061 Billet Aluminum |
| Surface Finish | CNC Machined Polished Aluminum Finish |
| Color | Black |
| Package Included | 4 Pcs |
| Interchange Part Number | For Dodge Ram 1500 Ramcharger Dakota Durango |
| Other Part Number | For Ford Bronco E-150 F-150 Econoline Club Wagon |
| Note | NOT for original wheel, Only work with 5x5"(5x127mm) Wheel |
| Type | Wheel Adapter |
We accept all kinds of ebay payment.

Shop Category Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
(4) 1.5" 5x5.5 to 5x5 Wheel Adapters 1/2"-20 For Dodge Ram 1500 Ford E-150 F-150
Compatible Vehicles:
For Dodge D150 1990-1993
Note: These adapters are used to change bolt pattern, 5x5.5 Hub to 5x5 Wheel
--If you dont't know the specific of your vehicle, pls confrim by following the below steps:
1) Check Vehicle Bolt Pattern/ PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
2) Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3) Check Vehicle Thread Pitch
There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
--Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
--Step for Installation Wheel Spacers
1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
3.Local pick up is not available.
4.Orders Will be shipped out from our warehouse in US.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
1,We stand behind every product we sell.
2,All of our brand new items come with a 60-Days money-back guarantee.
3,We define the item as defective only if it doesn't function as described.
4,It is the buyer's responsibility to understand the item description before bidding.
5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
7,Shipping & handling cost are not refundable.
8,Man-made damage by abuse or wrong operation is not covered by this warranty.
9,No product liability insurance is assumed.
1.All of our brand new items come with a 30-Days money-back guarantee.
We accept all kinds of ebay payment. 1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||