• Product parameter
  •  
    • Fits LH + RH (Driver & Passenger Side) Front
    • Fits 5 Lugs Models
     
  • Specifications:
  •  
    • Brand New Wheel Hub Bearing Steering Knuckle Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers: KA698476, 698-476, LK034, 4321102220, KA698477, 698-477, LK033, 4321202220, 4350202080, 4778202210, 9008036136
     
  • For the following years and models:
  •  
    • For Toyota Corolla 2014-2018
    • For Toyota Matrix 2014
    Packing include:
  •  
  • Front Steering Knuckles & Wheel Hub Bearings For 2009-2018 Toyota Corolla Matrix

    Product parameter

     

    • Fits LH + RH (Driver & Passenger Side) Front
    • Fits 5 Lugs Models

     

    Specifications:

     

    • Brand New Wheel Hub Bearing Steering Knuckle Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers: KA698476, 698-476, LK034, 4321102220, KA698477, 698-477, LK033, 4321202220, 4350202080, 4778202210, 9008036136

     

    For the following years and models:

     

    • For Toyota Corolla 2014-2018
    • For Toyota Matrix 2014

    Packing include:

     

    • (2) Steering Knuckles Wheel Hub Bearings (LH & RH)

     

    NOTE:

     

    • Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    • Pull out the front wheel sensor, being careful to turn it as little as possible.
    • Do not pull on wheel sensorharness.

     

    Inspection after removel : Check components for deformationy,cracksy,and other damagey,and  boots of transverse link ball joint for cracksy,axial end play,and swing torque. 

     

    Installation:

     

    Installation is in the reverse order of the removal

     

    Caution:

     

    1. Do not reuse the wheel stud.
    2. Do not reuse the cotter pin.
    3. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    4. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    5. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

     

     

        6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

        7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

        8.  When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

        9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.


    Item Specifics
    Manufacturer Part Number E847089WAY
    Brand ewaymotorarts
    Part Type Steering Knuckle
    Placement on Vehicle Front
    Quantity 2
    OE/OEM Part Number 698-477, 698-476
    Interchange Part Number LK033, 4321202220, LK034, 4321102220
    Superseded Part Number 4350202080, 4778202210, 9008036136
    Material Steel
    Surface Finish Polished, Rust Protected
    Fitment For Toyota Corolla 2014-2018; For Toyota Matrix 2014
    Drive Type 2WD 4WD
    Bolt Pattern 5 x 3.94 in (5 x 100 mm)
    Spline Quantity 26
    Bolt Circle Diameter 3.94 in. / 100 mm
    Brake Pilot Diameter 2.17 in. / 55 mm
    Flange Diameter 4.92 in. / 125 mm
    Hub Pilot Diameter 1.57 in. / 40 mm
    Wheel Pilot Diameter 2.13 in. / 54 mm
    Wheel Stud Quantity 5
    Wheel Stud Size M12x1.5
    Wheel Studs Included Yes
    Bearing Type Ball Bearing
    Hub Included Yes
    Knuckle Included Yes
    Nut Included No

    Payment
    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
    3.Local pick up is not available.
    4.Orders Will be shipped out from our warehouse in US.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
    Warranty
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
     6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.
    Returns
    1.All of our brand new items come with a 30-Days money-back guarantee.

     

    Payments

    We accept all kinds of ebay payment.

    Feedback
    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Front Steering Knuckles & Wheel Hub Bearings For 2009-2018 Toyota Corolla Matrix

    Product parameter

     

    • Fits LH + RH (Driver & Passenger Side) Front
    • Fits 5 Lugs Models

     

    Specifications:

     

    • Brand New Wheel Hub Bearing Steering Knuckle Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers: KA698476, 698-476, LK034, 4321102220, KA698477, 698-477, LK033, 4321202220, 4350202080, 4778202210, 9008036136

     

    For the following years and models:

     

    • For Toyota Corolla 2014-2018
    • For Toyota Matrix 2014

    Packing include:

     

    • (2) Steering Knuckles Wheel Hub Bearings (LH & RH)

     

    NOTE:

     

    • Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    • Pull out the front wheel sensor, being careful to turn it as little as possible.
    • Do not pull on wheel sensorharness.

     

    Inspection after removel : Check components for deformationy,cracksy,and other damagey,and  boots of transverse link ball joint for cracksy,axial end play,and swing torque. 

     

    Installation:

     

    Installation is in the reverse order of the removal

     

    Caution:

     

    1. Do not reuse the wheel stud.
    2. Do not reuse the cotter pin.
    3. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    4. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    5. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

     

     

        6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

        7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

        8.  When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

        9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    Item Specifics
    Manufacturer Part Number :E847089WAY
    Brand :ewaymotorarts
    Part Type :Steering Knuckle
    Placement on Vehicle :Front
    Quantity :2
    OE/OEM Part Number :698-477, 698-476
    Interchange Part Number :LK033, 4321202220, LK034, 4321102220
    Superseded Part Number :4350202080, 4778202210, 9008036136
    Material :Steel
    Surface Finish :Polished, Rust Protected
    Fitment :For Toyota Corolla 2014-2018; For Toyota Matrix 2014
    Drive Type :2WD 4WD
    Bolt Pattern :5 x 3.94 in (5 x 100 mm)
    Spline Quantity :26
    Bolt Circle Diameter :3.94 in. / 100 mm
    Brake Pilot Diameter :2.17 in. / 55 mm
    Flange Diameter :4.92 in. / 125 mm
    Hub Pilot Diameter :1.57 in. / 40 mm
    Wheel Pilot Diameter :2.13 in. / 54 mm
    Wheel Stud Quantity :5
    Wheel Stud Size :M12x1.5
    Wheel Studs Included :Yes
    Bearing Type :Ball Bearing
    Hub Included :Yes
    Knuckle Included :Yes
    Nut Included :No


    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
    3.Local pick up is not available.
    4.Orders Will be shipped out from our warehouse in US.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
     6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.
    1.All of our brand new items come with a 30-Days money-back guarantee.

     

    We accept all kinds of ebay payment.

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    All rights reserved.