Foxy Pirate Mask FNAF Five Nights at Freddys 3D Printed Cosplay Wall Display

Five Nights at Freddy's – Foxy 3D Printed Cosplay Mask / Wall Display Bring the horror of Five Nights at Freddy's to life with this premium Foxy mask. Expertly 3D printed in Australia, this versatile piece serves dual purposes — wear it as an authentic cosplay mask, or hang it as striking wall art. Standing approximately 30cm tall, this one captures Foxy the Pirate Fox exactly as the fandom loves him — that weathered rust-red fur, the long pointed snout, the eyepatch, and the torn, battle-worn muzzle with teeth showing through. Of the whole crew, Foxy has the most character in his damage, and that's what makes him such a standout on a wall. Wear it. Mount it. Both. Every mask is built to do double duty: Wall-mountable — a mounting cut-out is built into the back, so it hangs flush on a single screw or picture hook. No bracket needed, no drilling into the mask. Wearable — small holes on each side let you fit elastic and wear it for cosplay, Halloween or conventions. Worth being upfront about the fit: this is a shaped face piece rather than a deep hollow helmet, so it sits in front of your face rather than wrapping right around your head. That makes it brilliant for photos, market days, parties and trick-or-treating — but it's not a full head shell, so for a long day of wear you'll want to plan the odd break. Comfortable enough to wear, just not something you'll forget you have on. Fitting the elastic Elastic is not included. Every head is a different size and everyone likes a different tension, so we leave this one to you. A length of flat elastic (6–10mm works well) from any craft or fabric shop is all you need — thread it through the side holes, hold the mask up to your face, cut to length and tie it off. Two minutes with a pair of scissors and you're ready to go. The eyes that follow you 👀 These masks feature concave "follow me" eyes — an eerie optical illusion where the eyes appear to track you as you move around the room. The hollow shape fools your brain into perceiving depth in reverse, creating the unsettling effect of a gaze that never leaves you. It's the same principle used in novelty portraits and museum installations, and it works startlingly well. The removable eyes are a press fit — they push into the sockets and pull straight back out again. Each mask ships with a small quantity of blu-tack so you can hold the eyes firmly in place while it's on display, then simply pop them out when you want to wear the mask and actually see where you're going. Collect the full gang 🐻🐥🐰🦊 Foxy doesn't have to haunt your wall alone — Freddy, Bonnie, Chica and the Marionette are all available as matching 3D printed masks. Mix and match, or grab the whole crew for the ultimate FNAF display. Made to order in Australia Nothing sits on a shelf waiting. Each mask is printed for you after you order, using quality PLA filament, right here in Paxton in the Hunter Valley. Please allow 5–10 days for production before your order ships. These models are produced under a commercial licence from the original model creator, so every mask sold supports the designer behind the artwork as well as our small Australian workshop. The details Size: approximately 30cm tall Material: quality PLA, 3D printed in Australia Wall mount: integrated mounting cut-out on the reverse To wear: side holes for elastic — elastic not supplied Eyes: press-fit removable, small quantity of blu-tack included Made to order: please allow 5–10 days before dispatch Care: dust with a dry, soft cloth. Keep out of direct sunlight and hot cars — PLA softens in extreme heat. Whether you're building a Halloween costume, putting together a full FNAF cosplay, or you just want something seriously cool on the wall of the gaming room, this one delivers.

Five Nights at Freddy's – Foxy 3D Printed Cosplay Mask / Wall Display

Bring the horror of Five Nights at Freddy's to life with this premium Foxy mask. Expertly 3D printed in Australia, this versatile piece serves dual purposes — wear it as an authentic cosplay mask, or hang it as striking wall art.

Standing approximately 30cm tall, this one captures Foxy the Pirate Fox exactly as the fandom loves him — that weathered rust-red fur, the long pointed snout, the eyepatch, and the torn, battle-worn muzzle with teeth showing through. Of the whole crew, Foxy has the most character in his damage, and that's what makes him such a standout on a wall.

Wear it. Mount it. Both.

Every mask is built to do double duty:

Wall-mountable — a mounting cut-out is built into the back, so it hangs flush on a single screw or picture hook. No bracket needed, no drilling into the mask.
Wearable — small holes on each side let you fit elastic and wear it for cosplay, Halloween or conventions.

Worth being upfront about the fit: this is a shaped face piece rather than a deep hollow helmet, so it sits in front of your face rather than wrapping right around your head. That makes it brilliant for photos, market days, parties and trick-or-treating — but it's not a full head shell, so for a long day of wear you'll want to plan the odd break. Comfortable enough to wear, just not something you'll forget you have on.

Fitting the elastic

Elastic is not included. Every head is a different size and everyone likes a different tension, so we leave this one to you. A length of flat elastic (6–10mm works well) from any craft or fabric shop is all you need — thread it through the side holes, hold the mask up to your face, cut to length and tie it off. Two minutes with a pair of scissors and you're ready to go.

The eyes that follow you 👀

These masks feature concave "follow me" eyes — an eerie optical illusion where the eyes appear to track you as you move around the room. The hollow shape fools your brain into perceiving depth in reverse, creating the unsettling effect of a gaze that never leaves you. It's the same principle uséd in novelty portraits and museum installations, and it works startlingly well.

The removable eyes are a press fit — they push into the sockets and pull straight back out again. Each mask ships with a small quantity of blu-tack so you can hold the eyes firmly in place while it's on display, then simply pop them out when you want to wear the mask and actually see where you're going.

Collect the full gang 🐻🐥🐰🦊

Foxy doesn't have to haunt your wall alone — Freddy, Bonnie, Chica and the Marionette are all available as matching 3D printed masks. Mix and match, or grab the whole crew for the ultimate FNAF display.

Made to order in Australia

Nothing sits on a shelf waiting. Each mask is printed for you after you order, using quality PLA filament, right here in Paxton in the Hunter Valley. Please allow 5–10 days for production before your order ships.

These models are produced under a commercial licence from the original model creator, so every mask sold supports the designer behind the artwork as well as our small Australian workshop.

The details

Size: approximately 30cm tall
Material: quality PLA, 3D printed in Australia
Wall mount: integrated mounting cut-out on the reverse
To wear: side holes for elastic — elastic not supplied
Eyes: press-fit removable, small quantity of blu-tack included
Made to order: please allow 5–10 days before dispatch
Care: dust with a dry, soft cloth. Keep out of direct sunlight and hot cars — PLA softens in extreme heat.

Whether you're building a Halloween costume, putting together a full FNAF cosplay, or you just want something seriously cool on the wall of the gaming room, this one delivers.

eBay integration by

Note: All items are hand-made-to-order. This means typically the items aren't in stock or ready to ship instantly, they will be made once your order comes in, and then shipped. This can take a few days to happen, so please be patient while your item is made specially for you!

Due to the unique hand-made approach to creating your items, there can be very minor variances in each item, including colours and details, but all care is taken to ensure the photos accurately reflect the result you will recieve. See my feedback history for confidence of the satisfaction of previous customers.

If you have any questions or queries about his, please feel free to reach out and ask!

This also means you can make requests to customise your creation. For lights, if you'd like the cable to be on a certain side, or alter some colours, please feel free to ask!